Manuals / Vidikron / Computer Equipment / Computer Monitor

Vidikron VP-42HD, VP-60, VP-50 owner manual Important Information, » Precautions

Models: VP-42 VP-50 VP-42HD VP-60

1 117

Download 117 pages 32.87 Kb

Page 5

IMPORTANT INFORMATION

» Precautions

Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference.

CAUTION

RISK OF ELECTRIC SHOCK	!
RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

4

Image 5

Vidikron VP-42HD, VP-60, VP-50 owner manual Important Information, » Precautions

Contents

VP-42 / VP-42HD / VP-50 / VP-60 Owner’s Manual Limited Warranty TABLE OF CONTENTSHow to Attach Options to the Plasma Monitor InstallationVP-42 / VP-42HD / VP-50 / VP-60 Flat Panel Display Monitor INTRODUCTION» Introduction to the Vidikron PlasmaView Contents of the package » The features you’ll enjoy includeIntroduction OptionsIMPORTANT INFORMATION » PrecautionsImportant Information » Warnings and Safety PrecautionsImportant Information » To avoid damage and prolong operating lifeImportant Information » Plasma monitor cleaning procedureNOTE BURN-INS ARE NOT COVERED BY THE WARRANTY WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY LIMITED WARRANTYWHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY Limited Warranty EFFECTIVE WARRANTY DATEIMPORTANT WARRANTY REGISTRATION CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICEVIDIKRON ADDITIONAL INFORMATIONLimited Warranty Attn Customer Service Department 2900 Faber Street Union City, CAVentilation Requirements for enclosure mounting HOW TO ATTACH OPTIONS TO THE PLASMA MONITOR3 POWER 1 POWER6 VOLUME DOWN and UP PART NAMES AND FUNCTIONSA AC IN » Rear View / Terminal BoardC VIDEO 1,2,3 BNC, RCA, S-Video D AUDIO1, AUDIO2, AUDIO3Part Names and Functions Rear View / Terminal BoardCb/Pb G/ B/ Y Cb/Pb10 VOLUME + » Remote Control1 ON/OFF 2 CURSOR12 DISPLAY Remote Control continued13 LIGHT Part Names and FunctionsPart Names and Functions » Battery Installation and Replacement1. Press and open the cover 2. Align the batteries according to the + andPart Names and Functions » Handling the remote control» Operating Range HD Set Top Box with DVI HDCP Output, Computer, other devices INSTALLATION» Connecting Your PC or Macintosh Computer InstallationInstallation » Connecting Your VCR or Laser Disc Player» Connecting Your DVD Player » Pin Configuration and Signal of the RGB 3 Connector DVI Connector » Pin Assignment and Signal Levels for 15 pin RGB analogInstallation Pin No» VOLUME » POWERTo adjust the sound volume To cancel the soundTo set the timer off » TIMER OFFTo cancel the off timer Basic OperationsLTR BOX mode When viewing videos or DVDsSTD 43 mode ANAMPHC modeActive Image Area INTELLIWIDE modeAspect Ratio Controls Aspect Ratio Controls » Aspect Ratio Operation with Computer Signals2. Within 3 seconds OSD On Screen Display Controls » Menu Operations Default OSD On Screen Display ControlsReset ADJUSTDefault AUDIO SETUPDefault ResetReset DefaultSETTING SETTINGReset DefaultSIGNAL INFO OSD On Screen Display ControlsAdjusting the picture » Picture Adjust MenuPress the MENU button on the remote control to display the If “CAN NOT ADJUST” appears4. Once the adjustment is completed Setting the picture mode according to the brightness of the room3. To set to “FACTORY” Press the MENU button on the remote control to display theReducing noise in the picture 4. Once the setting is completedPress the MENU button on the remote control to display the MAIN MENU on the screen, thenAdjusting the color to the desired level Setting the White BalancePerform the following operations Perform Steps 1-3 of WHITE BAL., thenChanging the Gamma Curve 7. Once the adjustment is completedAdjusting the white balance OSD On Screen Display Controls4. Once the setting is completed Making the Dither adjustments4. Once the setting is completed OSD On Screen Display Controls5. Once the setting is completed Adjusting the colorsCOLOR CHART Perform the following operationsTo continue adjusting the audio » Audio Setup MenuPress the MENU button on the remote control to display the COLOR CHART settingsSetting the allocation of the audio connectors Set “AUDIO INPUT” on the AUDIO SETUP menu correctly3. To set the AUDIO INPUT1 to “VIDEO2” If “CAN NOT ADJUST” appearsTo select a mode » Image Options Settings Menu2. To adjust the vertical position To continue making other computer image adjustmentsAdjusting the COMPUTER OSD On Screen Display Controls 4. Once all adjustments are completedAdjusting the position of the image Restoring the factory defaults settingsSetting the on-screen menu » SETTING 1 Settings Menu4. To set the DISPLAY OSD to “OFF” Press the MENU button on the remote control to display the3. To set the BNC INPUT mode to “COMP” Setting the BNC connectorsPress the MENU button on the remote control to display the 4. Once the setting is completedPress the MENU button on the remote control to display the 3. To set the RGB select mode to “AUTO”4. Once the setting is completed OSD On Screen Display ControlsPress the MENU button on the remote control to display the 3. To set the HD TYPE mode to “1080B”4. Once the setting is completed Restoring the factory default settings3. To set the INPUT SKIP mode to “OFF” Setting the Input SkipPress the MENU button on the remote control to display the 4. Once the setting is completed4. Once the setting is completed Resetting to the default valuesSETTING OSD On Screen Display ControlsSetting the Auto Off for computer images » SETTING 2 Menu3. To turn the Auto Off function on 4. Once the setting is completedSetting the picture to suit the movie POWER / STANDBY indicatorOSD On Screen Display Controls 3. To set the CINEMA MODE to “OFF” 4. Once the setting is completedPerform Steps 1-2 of PIXL PROTECT, then Dynamic Pixel Protection PIXL PROTECT Reducing burn-in of the screen4. Once the setting is completed OSD On Screen Display ControlsExample Setting ”ORBITER” to “AUTO1” ORBITERLUM. SETTING ORBITER settingsPerform Steps 1-3 of ORBITER, then Adjust the ORBITER function manuallyINVERSE OSD On Screen Display Controls6. Once the setting is completed Setting the time for INVERSE/WHITEPerform Steps 1-3 of INVERSE, then OSD On Screen Display ControlsIMAGE SWEEP Setting the time for IMAGE SWEEP Set a time duration and the speedPerform Steps 1-3 of IMAGE SWEEP, then OSD On Screen Display ControlsSOFTEN Setting the Sidebar Lev. for the sides of the screen6. Once the setting is completed OSD On Screen Display ControlsOSD On Screen Display Controls 3. To adjust the “SIDEBAR LEV.”Setting the screen size for S1/S2 video input 4. Once the setting is completed OSD On Screen Display Controls 3.To set PLUG/PLAY mode to “STB/DVD”Perform the following operations DVI TYPEUsing the timer » SETTING 3 MenuPRESET TIME Perform Steps 1-2 of TIMER, then5. Once the setting is completed The mode switches as follows each time the or buttons is pressedPRESET TIME settings DAYLIGHT SAVING TIMEPerform Steps 1-2 of TIMER, then PROGRAM TIMER6. Once the setting is completed OSD On Screen Display Controls3. To set the DEFAULT INPUT to “VIDEO2” Setting the DEFAULT INPUTPROGRAM TIMER settings To reset the program4. Once the setting is completed Enabling/disabling the front panel controlsOSD On Screen Display Controls Perform the following operations3. To set the CONTROL LOCK to “ON” 3. To set the IR ENABLE to “OFF”4. Once the setting is completed CONTROL LOCK settingsLoop Out Setting OSD On Screen Display Controls 4. Once the setting is completed3. To set the LOOP OUT to “ON” IR ENABLE settings3. To set the ID NUMBER to “O2” ID Number SettingPerform the following operations OSD On Screen Display Controls4. Once the setting is completed Video Wall SettingOSD On Screen Display Controls Perform the following operationsPerform Steps 1-2 of VIDEO WALL, then DIVIDERVIDEO WALL POSITION OSD On Screen Display ControlsAUTO ID DISP. MODEVIDEO WALL POSITION settings DISP. MODE SETTINGSOSD On Screen Display Controls Set the ID number for the No. 1 display on ID NUMBER menuOSD On Screen Display Controls P. ON DELAY Power on delay6. Once the setting is completed Perform Steps 1-2 of VIDEO WALL, then P. ON DELAY settingsOSD On Screen Display Controls LUM SET LINKPerform Steps 1-2 of VIDEO WALL, then REPEAT TIMER REPTROSD On Screen Display Controls REPTR TIME settings 6. Once the setting is completedOSD On Screen Display Controls 00H01M 00H02M 00H03M .... 04H14M 04H15MSetting the language for the menus » Language Settings Menu3. Once the setting is completed 2. To select “DEUTSCH”OSD On Screen Display Controls 3. Once the setting is completed Setting the video signal format» Video Standard Menu 2. To select “3.58NTSC”Checking the frequencies, polarities of input signals, and resolution » Signal Info. Menu3. Once you have checked the frequency Press the MENU button on the remote control to display theEXTERNAL CONTROLS Type of connector D-Sub 9-pin maleApplication ConnectionsCommunication Format CommandExternal Controls Unit ID 1 and Unit IDExternal Controls Command Reference ListCMD1 CMD202 POWER OFF 01 POWER ON03 INPUT SWITCH CHANGE External Controls05 AUDIO MUTE ON 04 VOLUME GAIN DATA06 AUDIO MUTE OFF 07 CONTRAST GAIN DATAExternal Controls 08 BRIGHT GAIN DATA09 SHARPNESS GAIN DATA External Controls 10 COLOR GAIN DATA11 TINT GAIN DATA External Controls 12 IMAGE MEM. SELECT13 WHITE BAL. SELECT External Controls 14 RED GAIN DATA15 GREEN GAIN DATA External Controls 17 VID NR MODE SET16 BLUE GAIN DATA 19 TREBLE GAIN DATA 18 BASS GAIN DATAExternal Controls ODH +13External Controls 20 BALANCE Gain Data21 ASPECT RATIO SELECT External Controls 22 V SHIFT GAIN DATA23 H SHIFT GAIN DATA External Controls 24 V-SIZE GAIN DATA25 H-SIZE GAIN DATA External Controls 26 PHASE GAIN DATA27 CLOCK GAIN DATA 29 OSD ADJ. GAIN DATA 28 OSD SELECTOperation External Controls30 AUTO OFF SELECT 32 CINEMA MODE SET31 SIDEBAR LEV. SET External ControlsExternal Controls 33 RGB3 ADJ. SELECT34 PIXL PROTECT SET 36 IMAGE SWEEP SET 35 INVERSE SETExternal Controls STANDBY38 AUDIO SELECT SET 37 FACTORYExternal Controls ExampleExternal Controls 39 BNC SELECT41 RGB SELECT External Controls 41 HD SELECT42 LANGUAGE SELECT 44 FREQUENCY REQUEST 43 VIDEO STANDARD SELECTExternal Controls Horizontal sync polarityRESOLUTION 45 INPUT MODE REQUESTExternal Controls ACK continuedACK continued 46 VIDEO ADJ REQUESTExternal Controls ACK continued 47 AUTO SELECT REQUESTExternal Controls External Controls 48 FAILURE MODE REQUEST49 MODEL NAME REQUEST Computer input signals supported by this system TABLE OF SIGNALS SUPPORTEDScreen Mode Table of Signals Supported continuedModel Sync PolarityIf you are connecting a composite sync signal, use the HD terminal With digital input some signals are not acceptedTable of Signals Supported continued 7 Other screen modes LTR BOX and I-WIDE are available as wellSYMPTOM TROUBLESHOOTINGCHECKS REMEDYSYMPTOM Troubleshooting continuedCHECKS REMEDYVP-42HD VP-42VP-50 VP-60Limited Warranty Specifications continuedVP-42 VP-42HDVP-42 / VP-42HD DIMENSIONS4.899 1.474 1.665 40.301VP-50 Dimensions3.941 1.667 2.172 48.407Dimensions VP-602.227 58.117 4.855 1.903Ph 510 324-5900 / Fax 510 1-888-4-VIDIKRON RUMA-010550 4-04 VIDIKRON 2900 Faber Street Union City, CA