Vidikron VP-42HD, VP-60, VP-50 Video Wall Setting, OSD On Screen Display Controls, Select Id

OSD (On Screen Display) Controls

SELECT ID

POSITION 1: 1

ID NUMBER : OFF

ADJ. EXIT EXIT

*To reset back to ALL Press the CLEAR button.

4. Once the setting is completed...

Press the EXIT button to delete the SELECT ID screen.

Video Wall Setting

Use this feature to configure a 2×2 or 3×3 video wall.

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “SETTING 3”, then press the MENU button. The “SETTING 3” screen appears.

2.Use the and buttons to select “VIDEO WALL”, then press the MENU button. The “VIDEO WALL” screen appears.

68

VIDEO WALL

DIVIDER	:	1
POSITON
DISP. MODE	: SPLIT
AUTO ID	:	OFF
IMAGE ADJUST
P. ON DELAY	:	OFF
LUM SET LINK	:	OFF
REPTR TIME	:	OFF
SEL.	ADJ.	EXIT EXIT

3.Set the VIDEO WALL using and buttons. See page 69 to set DIVIDER.

See page 69 to set POSITION. See page 70 to set DISP. MODE. See page 70 to set AUTO ID.

See page 71 to set IMAGE ADJUST. See page 72 to set P. ON DELAY. See page 73 to set LUM SET LINK. See page 74 to set REPTR TIME.

4.Once the setting is completed...

Press the EXIT button to return to the SETTING 3 menu.

5.Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

NOTE:

A contingency method of shutting off the electric power should be used in cases of emergency during video wall setup.