Vidikron VP-42, VP-60, VP-50 Use the and buttons to select Sidebar LEV, To adjust the Sidebar LEV

OSD (On Screen Display) Controls

2.Use the and buttons to select “SIDEBAR LEV.”.

3.To adjust the “SIDEBAR LEV.” ...

Use the and buttons to adjust the SIDEBAR LEV..

	SETTING 2			2 / 3
	PREVIOUS PG.
AUTO OFF		:	OFF
CINEMA MODE		:	ON
PIXL PROTECT		:	OFF
SIDEBAR LEV.		:	5
S1 / S2		:	OFF
DVI TYPE
	NEXT PAGE
SEL.	ADJ.		EXIT EXIT

Information

■SIDEBAR LEV. settings

This adjusts the brightness of the black (the Sidebar Lev.) for the sides of the screen. The standard is 0 (black). The level can be adjusted from 0 to 15. The factory setting is 3 (dark gray).

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

Setting the screen size for S1/S2 video input

If the S-Video signal contains screen size information, the image will be automatically adjusted to fit the screen when this S1/S2 is set to AUTO.

This feature is available only when an S-Video signal is input via the VIDEO3 terminal.

Example: Setting the “S1/S2” to “AUTO” Perform the following operations.

1.On the MAIN MENU, select “SETTING 2”, then press MENU button. The “SETTING 2” screen appears.

2.Use the and buttons to select “S1/S2”.

3.Use the and buttons to select “AUTO”. The mode switches as follows each time the and buttons is pressed:

OFF AUTO

	SETTING 2			2 / 3
PREVIOUS PG.
PWR. MGT.		:	OFF
CINEMA MODE		:	ON
PIXL PROTECT		:	OFF
SIDE BARS		:	5
S1 / S2		:	AUTO
AUTO SIZE		:	ON
DVI TYPE
NEXT PAGE
SEL.	ADJ.		EXIT EXIT

58