Vidikron VP-60, VP-42HD, VP-50 » Aspect Ratio Operation with Computer Signals, Within 3 seconds

» Aspect Ratio Operation with Computer Signals

Switch to the wide screen mode to expand the 4:3 image to fill the entire screen.

1.Press the ASPECT button on the remote control.

2.Within 3 seconds...

Press the ASPECT button again. The screen size switches as follows:

STD (4:3) ANAMPHC LTR BOX

STD 4:3 mode (4:3 or SXGA 5:4)

Active

Image

Area

The picture has the same size as the normal computer image.

ANAMPHC mode

Active Image Area

The image is expanded in the horizontal direction.

Aspect Ratio Controls

LTR BOX mode

Active Image Area

When wide signals are input.

Information

■Supported resolution

See page 106 for details on the display output of the various VESA signal standards supported by the monitor.

■When 853 (848) dot x 480 line wide VGA *signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are input.

Select an appropriate setting for RGB SELECT mode referring to the “Table of Signals Supported” on page 106.

* “IBM PC/AT” and “VGA” are registered trademarks of IBM, Inc. of the United States.

NOTE:

Do not leave the displayed in 4:3 mode for an extended period. This can cause a phosphor burn-in.

27