Perform Steps 1-2 of Pixl PROTECT, then | Vidikron VP-42HD, VP-60

OSD (On Screen Display) Controls

Dynamic Pixel Protection (PIXL PROTECT)

Reducing burn-in of the screen

The brightness of the screen, the position of the picture, positive/ negative mode and image sweep are adjusted to reduce burn-in of the screen.

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “SETTING 2”, then press the MENU button. The “SETTING 2” menu appears.

2.Use the and buttons to select “PIXL PROTECT”, then press the MENU button. The “PIXL PROTECT” screen appears.

PIXL PROTECT

LUM. SETTING			:	AUTO
ORBITER			:	OFF
INVERSE			:	OFF
IMAGE SWEEP			:	OFF
SOFTEN			:	OFF
SEL.	ADJ.			EXIT EXIT

3.Set the PIXL PROTECT mode using and buttons. See page 52 to set LUM. SETTING

See page 53 to set ORBITER. See page 54 to set INVERSE.

See page 56 to set IMAGE SWEEP.

Information

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

4.Once the setting is completed...

Press the EXIT button to return to the SETTING 2 screen.

To return to the main menu, press the EXIT button once more.

LUM. SETTING (Luminance Setting) Use this to activate the brightness limiter. Example: Setting “LUM. SETTING” to “SET. 1”

Perform Steps 1-2 of PIXL PROTECT, then...

3.Use the and buttons to select “LUM SETTING” (relates to above)

4.Use the and buttons to select “SET. 1”. The mode switches as follows each time the or button is pressed:

AUTO SET. 1 SET. 2 SET. 3

52

Image 53

Vidikron VP-42HD, VP-60, VP-50 owner manual Perform Steps 1-2 of Pixl PROTECT, then

Contents

Page Table of Contents Introduction Options » The features you’ll enjoy includeContents of the package Important Information » Precautions Important Information » Warnings and Safety Precautions » To avoid damage and prolong operating life » Plasma monitor cleaning procedure What is Covered Under the Terms of this Limited Warranty Limited Warranty Limited Warranty Effective Warranty DateImportant Warranty Registration RIGHTS, Limits and Exclusions Vidikron Additional Information Ventilation Requirements for enclosure mounting HOW to Attach Options to the Plasma Monitor » Front View Part Names and Functions External Control » Rear View / Terminal BoardAUDIO1, AUDIO2, AUDIO3 Y Cb/Pb Rear View / Terminal Board » Remote Control Displays the source settings on the screen Remote ControlDisplay Light » Battery Installation and Replacement » Operating Range » Handling the remote control Video Installation » Connecting Your PC or Macintosh Computer Installation » Connecting Your DVD Player » Connecting Your VCR or Laser Disc Player RGB » Pin Assignment and Signal Levels for 15 pin RGB analog » Volume » PowerBasic Operations » Mute To set the timer off » Timer OFFTo cancel the off timer Basic Operations » Aspect Ratio Operations Manual Aspect Ratio Controls Aspect Ratio Controls Intelliwide mode Within 3 seconds » Aspect Ratio Operation with Computer Signals Button on the remote control to return to the main menu Change the adjustments or the settings that are storedOSD On Screen Display Controls » Menu Operations Memory. The change is stored until you change it again OSD On Screen Display Controls Adjust Image HD Type Language Use the and buttons to adjust the contrast » Picture Adjust MenuAdjusting the picture Once the adjustment is completed Example Setting the Factory modeTo set to Factory Types of picture modes LW BLK1 Types of noise reduction Once the setting is completedReducing noise in the picture Adjusting the color to the desired level Setting the White BalanceSee below to set White Balance Adjust Changing the Gamma Curve Adjust the white balance using the and buttonsAdjusting the white balance Gamma Curve settings Making the Dither adjustments Diffuse Adjusting the colorsDither settings To continue adjusting the audio » Audio Setup MenuColor Chart settings Audio setup menu To set the Audio INPUT1 to VIDEO2 Setting the allocation of the audio connectorsExample Setting Audio INPUT1 to Video To select a mode » Image Options Settings MenuTo adjust the vertical position To continue making other computer image adjustments Adjusting the position of the image Adjusting the ComputerRestoring the factory defaults settings OFF To set the Display OSD to OFF » Setting 1 Settings MenuSetting the on-screen menu To set the BNC Input mode to Comp Setting the BNC connectorsOSD Orbiter settings BNC Input settings Example Setting the RGB Type mode to Auto It is set to RGB and can not be adjustedTo set the RGB select mode to Auto RGB Type modes To set the HD Type mode to 1080B Example Setting the 1080B mode to To set the Input Skip mode to OFF Setting the Input SkipInput Skip settings HD Type modes Use the and buttons to select ON, then press the Menu button Resetting to the default values To turn the Auto Off function on » Setting 2 MenuSetting the Auto Off for computer images Setting the picture to suit the movie Power / Standby indicator Perform Steps 1-2 of Pixl PROTECT, then Orbiter Orbiter settings Orbiter Function settings Adjust the Orbiter function manuallyPerform Steps 1-3 of ORBITER, then Inverse Setting the time Setting the time for INVERSE/WHITEPerform Steps 1-3 of INVERSE, then Press the Exit button to return to the Pixl Protect screen Perform Steps 1-3 of Image SWEEP, then Example Setting Image Sweep to onImage Sweep Soften settings Setting the Sidebar Lev. for the sides of the screenPress the Exit button to return to the Image Sweep screen Soften Use the and buttons to adjust the Sidebar LEV To adjust the Sidebar LEVSetting the screen size for S1/S2 video input Sidebar LEV. settings PLUG/PLAY Settings S1/S2 SettingsBlack Level settings Perform the following operations Using the timer » Setting 3 MenuPreset Time Perform Steps 1-2 of TIMER, then Daylight Saving Time Preset Time settingsDAY Hour ON/OFF Hour Program TimerUse the and buttons to select Program Use the and buttons to select VIDEO2 Setting the Default InputTo set the Default Input to VIDEO2 → RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ← Input Select settings→ RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ← Enabling/disabling the front panel controls To set the IR Enable to OFF Example Setting OFF Perform the following operationsControl Lock settings To set the Control Lock to on IR Enable settings Loop Out SettingLoop OUT settings To set the Loop OUT to on To reset back to ALL Press the Clear button ID Number SettingID Number settings When the ID Number has been set Use this feature to configure a 2×2 or 3×3 video wall Video Wall Setting Set the position of each display Example Setting Set the 2x2 or 3x3 video wall Example SettingDivider Perform Steps 1-2 of Video WALL, then Video Wall Position settings DISP. ModePress the Exit button to return to the Video Wall screen Auto ID Use Auto ID settings On Delay Power on delay Video Wall On Delay settings Use the and buttons to select Reptr Time Repeat Timer ReptrLUM SET Link settings Divider Source Reptr Time settings Setting the language for the menus » Language Settings MenuLanguage settings English German French Spanish Italian To select Deutsch To select 3.58NTSC Setting the video signal format» Video Standard Menu Video standard formats » Signal Info. MenuOnce you have checked the frequency Application External ControlsConnections Communication Parameters Communication Format CommandExternal Controls Unit ID 1 and Unit ID CMD1 CMD2 LEN Command Reference List Input Switch Change Power onPower OFF Audio Mute on Volume Gain DataAudio Mute OFF Contrast Gain Data Sharpness Gain Data Bright Gain Data Tint Gain Data Color Gain Data White BAL. Select Image MEM. Select Green Gain Data RED Gain Data Blue Gain Data VID NR Mode SET Treble Gain Data Bass Gain Data Aspect Ratio Select Balance Gain Data Shift Gain Data Size Gain Data Clock Gain Data Phase Gain Data OSD ADJ. Gain Data OSD Select Sidebar LEV. SET Cinema Mode SETAuto OFF Select Pixl Protect SET 33 RGB3 ADJ. Select Image Sweep SET Inverse SET Audio Select SET Factory RGB Select BNC Select 100 HD SelectLanguage Select 101 Video Standard SelectFrequency Request 102 Input Mode Request 103 Video ADJ Request 104 Auto Select Request 105 Failure Mode RequestModel Name Request 106 Table of Signals SupportedComputer input signals supported by this system 107 Table of Signals Supported PAL625P 109 Troubleshooting 110 Troubleshooting 111 Specifications 112 Specifications 113 Dimensions 114 Dimensions 115 VP-60 RUMA-010550