Vidikron VP-60, VP-42HD Perform the following operations, S1/S2 Settings, PLUG/PLAY Settings

Information

■S1/S2 Settings

AUTO	Adjusts the screen size automatically according to
the S1/S2 video signal.
OFF	Turns the S1/S2 funtion off.

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that this also restores other settings to the factory defaults.

4.Once the setting is completed...

Press the EXIT button to return to the SETTING 3 screen.

To return to the main menu, press the EXIT button once more.

Setting the signal and black level for DVI signal Example: Setting the “PLUG/PLAY” mode on “STB/DVD”

Perform the following operations.

1.On the MAIN MENU, select “SETTING 2” , then press the MENU button. The “SETTING 2” screen appears.

2.Use the and buttons to select “DVI TYPE”, then press the MENU button. The “DVI TYPE” screen apprears.

OSD (On Screen Display) Controls

3.To set PLUG/PLAY mode to “STB/DVD” ...

Use the and buttons to select “STB/DVD”.

The mode switches as follows each time the and buttons is

pressed:
PLUG/PLAY:			PC		STB/DVD
BLACK LEVEL:			LOW		HIGH
		DVI TYPE
	PLUG/PLAY		:	STB/DVD
	BLACK LEVEL		:	HIGH
	SEL.	ADJ.		EXIT EXIT

Information

■ PLUG/PLAY Settings

PC............... When connected to the PC signal.

BLACK LEVEL is set to “HIGH” automatically. STB/DVD.... When connected to a satellite receiver, DVD, etc.

BLACK LEVEL is set to “HIGH” automatically.

■ BLACK LEVEL settings

LOW ........ When connected to the PC signal.

HIGH ....... When connected to the satellite receiver, DVD, etc.

Change “HIGH” into “OFF” if the black level apprears gray.

59