Vidikron VP-60, VP-42HD, VP-50 To set the HD TYPE mode to “1080B”, MAIN MENU on the screen, then

MOTION:	The video signal (from a scan converter) will be
	converted to RGB signals to make the picture
	more easily viewable. (Use this mode for a motion
	image from a computer.)
RESIZE1:	When an 852 dot 480 line signal with a horizontal
	frequency of 31.7kHz is input, the image may be
	compressed horizontally. To prevent this, set RGB
	TYPE to RESIZE1.
RESIZE2:	When an 848 dot 480 line signal with a horizontal
	frequency of 31.0 kHz is input, the image may be
	compressed horizontally. To prevent this, set RGB
	TYPE to RESIZE2.
DTV:	Set this mode when watching digital broadcasting
	(480P).

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

Setting high definition images to the suitable screen size Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080.

Example Setting the “1080B” mode to “1035I”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

OSD (On Screen Display) Controls

1.Use the and buttons to select “SETTING 1”, then press the MENU button. The “SETTING 1” menu appears.

2.Use the and buttons to select “HD TYPE”.

3.To set the HD TYPE mode to “1080B”...

Use the and buttons to select “1080B”. The mode switches as follows each time the or button is pressed:

1080B 1035I 1080A

SETTING 1

OSD
BNC INPUT	:		COMP
D-SUB TYPE	:		RGB
RGB TYPE	:		AUTO
HD TYPE		:	1080B
INPUT SKIP	:		OFF
FACTORY	:		OFF
NEXT PAGE
SEL.	ADJ.		EXIT EXIT

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

47