Manuals / Vidikron / Computer Equipment / Computer Monitor

Vidikron VP-42 » SETTING 2 Menu, Setting the Auto Off for computer images, AUTO OFF function

Models: VP-42 VP-50 VP-42HD VP-60

1 117

Download 117 pages 32.87 Kb

Page 51

» SETTING 2 Menu

OSD (On Screen Display) Controls

» SETTING 2 Menu

Setting the Auto Off for computer images

This energy-saving (Auto Off) function automatically reduces the monitor’s power consumption if no operation is performed for a certain amount of time.

Example: Turning the Auto Off function on

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “SETTING 2”, then press the MENU button. The “SETTING 2” menu appears.

2.Use the and buttons to select “AUTO OFF”.

3.To turn the Auto Off function on ...

Use the and buttons to select “ON”. The mode switches as follows each time the or button is pressed:

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

■AUTO OFF function

*The auto off function automatically reduces the monitor’s power consumption if the computer’s keyboard or mouse is not operated for a certain amount of time. This function can be used when using the monitor with a computer.

*If the computer’s power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state.

*For instructions on using the computer’s Auto Off function, refer to the computer’s operating instructions.

■AUTO OFF settings

ON	In this mode the Auto Off function is turned on. OFF	In
this mode the Auto Off function is turned off.

■AUTO OFF function and POWER / STANDBY indicator

ON OFF

50

	SETTING 2					2 / 3
	PREVIOUS PG.
	AUTO OFF			:	OFFf
	CINEMA MODE			:	ON
	PIXL PROTECT			:	OFF
	GRAY LEVEL			:	3
	S1 / S2			:	OFF
	DVI TYPE
	NEXT PAGE
	SEL.	ADJ.			EXIT EXIT

The POWER/STANDBY indicator indicates the status of the Auto Off function. See page 51 for indicator status and description.

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

Image 51

Vidikron VP-60, VP-42HD » SETTING 2 Menu, Setting the Auto Off for computer images, To turn the Auto Off function on

Contents

VP-42 / VP-42HD / VP-50 / VP-60 Owner’s Manual Installation TABLE OF CONTENTSLimited Warranty How to Attach Options to the Plasma MonitorINTRODUCTION » Introduction to the Vidikron PlasmaViewVP-42 / VP-42HD / VP-50 / VP-60 Flat Panel Display Monitor Options » The features you’ll enjoy includeContents of the package IntroductionIMPORTANT INFORMATION » PrecautionsImportant Information » Warnings and Safety PrecautionsImportant Information » To avoid damage and prolong operating life» Plasma monitor cleaning procedure NOTE BURN-INS ARE NOT COVERED BY THE WARRANTYImportant Information LIMITED WARRANTY WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTYWHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE EFFECTIVE WARRANTY DATELimited Warranty IMPORTANT WARRANTY REGISTRATIONAttn Customer Service Department 2900 Faber Street Union City, CA ADDITIONAL INFORMATIONVIDIKRON Limited WarrantyVentilation Requirements for enclosure mounting HOW TO ATTACH OPTIONS TO THE PLASMA MONITORPART NAMES AND FUNCTIONS 1 POWER3 POWER 6 VOLUME DOWN and UPD AUDIO1, AUDIO2, AUDIO3 » Rear View / Terminal BoardA AC IN C VIDEO 1,2,3 BNC, RCA, S-VideoG/ B/ Y Cb/Pb Rear View / Terminal BoardPart Names and Functions Cb/Pb2 CURSOR » Remote Control10 VOLUME + 1 ON/OFFPart Names and Functions Remote Control continued12 DISPLAY 13 LIGHT2. Align the batteries according to the + and » Battery Installation and ReplacementPart Names and Functions 1. Press and open the cover» Handling the remote control » Operating RangePart Names and Functions HD Set Top Box with DVI HDCP Output, Computer, other devices INSTALLATION» Connecting Your PC or Macintosh Computer Installation» Connecting Your VCR or Laser Disc Player » Connecting Your DVD PlayerInstallation Pin No » Pin Assignment and Signal Levels for 15 pin RGB analog» Pin Configuration and Signal of the RGB 3 Connector DVI Connector InstallationTo cancel the sound » POWER» VOLUME To adjust the sound volumeBasic Operations » TIMER OFFTo set the timer off To cancel the off timerANAMPHC mode When viewing videos or DVDsLTR BOX mode STD 43 modeINTELLIWIDE mode Aspect Ratio ControlsActive Image Area » Aspect Ratio Operation with Computer Signals 2. Within 3 secondsAspect Ratio Controls OSD On Screen Display Controls » Menu Operations ADJUST OSD On Screen Display ControlsDefault ResetReset AUDIO SETUPDefault DefaultSETTING DefaultReset SETTINGOSD On Screen Display Controls DefaultReset SIGNAL INFOIf “CAN NOT ADJUST” appears » Picture Adjust MenuAdjusting the picture Press the MENU button on the remote control to display thePress the MENU button on the remote control to display the Setting the picture mode according to the brightness of the room4. Once the adjustment is completed 3. To set to “FACTORY”MAIN MENU on the screen, then 4. Once the setting is completedReducing noise in the picture Press the MENU button on the remote control to display thePerform Steps 1-3 of WHITE BAL., then Setting the White BalanceAdjusting the color to the desired level Perform the following operationsOSD On Screen Display Controls 7. Once the adjustment is completedChanging the Gamma Curve Adjusting the white balanceOSD On Screen Display Controls Making the Dither adjustments4. Once the setting is completed 4. Once the setting is completedPerform the following operations Adjusting the colors5. Once the setting is completed COLOR CHARTCOLOR CHART settings » Audio Setup MenuTo continue adjusting the audio Press the MENU button on the remote control to display theIf “CAN NOT ADJUST” appears Set “AUDIO INPUT” on the AUDIO SETUP menu correctlySetting the allocation of the audio connectors 3. To set the AUDIO INPUT1 to “VIDEO2”To continue making other computer image adjustments » Image Options Settings MenuTo select a mode 2. To adjust the vertical positionRestoring the factory defaults settings OSD On Screen Display Controls 4. Once all adjustments are completedAdjusting the COMPUTER Adjusting the position of the imagePress the MENU button on the remote control to display the » SETTING 1 Settings MenuSetting the on-screen menu 4. To set the DISPLAY OSD to “OFF”4. Once the setting is completed Setting the BNC connectors3. To set the BNC INPUT mode to “COMP” Press the MENU button on the remote control to display theOSD On Screen Display Controls 3. To set the RGB select mode to “AUTO”Press the MENU button on the remote control to display the 4. Once the setting is completedRestoring the factory default settings 3. To set the HD TYPE mode to “1080B”Press the MENU button on the remote control to display the 4. Once the setting is completed4. Once the setting is completed Setting the Input Skip3. To set the INPUT SKIP mode to “OFF” Press the MENU button on the remote control to display theOSD On Screen Display Controls Resetting to the default values4. Once the setting is completed SETTING4. Once the setting is completed » SETTING 2 MenuSetting the Auto Off for computer images 3. To turn the Auto Off function on4. Once the setting is completed POWER / STANDBY indicatorSetting the picture to suit the movie OSD On Screen Display Controls 3. To set the CINEMA MODE to “OFF”OSD On Screen Display Controls Dynamic Pixel Protection PIXL PROTECT Reducing burn-in of the screenPerform Steps 1-2 of PIXL PROTECT, then 4. Once the setting is completedORBITER settings ORBITERExample Setting ”ORBITER” to “AUTO1” LUM. SETTINGOSD On Screen Display Controls Adjust the ORBITER function manuallyPerform Steps 1-3 of ORBITER, then INVERSEOSD On Screen Display Controls Setting the time for INVERSE/WHITE6. Once the setting is completed Perform Steps 1-3 of INVERSE, thenOSD On Screen Display Controls Setting the time for IMAGE SWEEP Set a time duration and the speedIMAGE SWEEP Perform Steps 1-3 of IMAGE SWEEP, thenOSD On Screen Display Controls Setting the Sidebar Lev. for the sides of the screenSOFTEN 6. Once the setting is completed3. To adjust the “SIDEBAR LEV.” Setting the screen size for S1/S2 video inputOSD On Screen Display Controls DVI TYPE OSD On Screen Display Controls 3.To set PLUG/PLAY mode to “STB/DVD”4. Once the setting is completed Perform the following operationsPerform Steps 1-2 of TIMER, then » SETTING 3 MenuUsing the timer PRESET TIMEDAYLIGHT SAVING TIME The mode switches as follows each time the or buttons is pressed5. Once the setting is completed PRESET TIME settingsOSD On Screen Display Controls PROGRAM TIMERPerform Steps 1-2 of TIMER, then 6. Once the setting is completedTo reset the program Setting the DEFAULT INPUT3. To set the DEFAULT INPUT to “VIDEO2” PROGRAM TIMER settingsPerform the following operations Enabling/disabling the front panel controls4. Once the setting is completed OSD On Screen Display ControlsCONTROL LOCK settings 3. To set the IR ENABLE to “OFF”3. To set the CONTROL LOCK to “ON” 4. Once the setting is completedIR ENABLE settings OSD On Screen Display Controls 4. Once the setting is completedLoop Out Setting 3. To set the LOOP OUT to “ON”OSD On Screen Display Controls ID Number Setting3. To set the ID NUMBER to “O2” Perform the following operationsPerform the following operations Video Wall Setting4. Once the setting is completed OSD On Screen Display ControlsOSD On Screen Display Controls DIVIDERPerform Steps 1-2 of VIDEO WALL, then VIDEO WALL POSITIONDISP. MODE SETTINGS DISP. MODEAUTO ID VIDEO WALL POSITION settingsOSD On Screen Display Controls Set the ID number for the No. 1 display on ID NUMBER menuP. ON DELAY Power on delay 6. Once the setting is completedOSD On Screen Display Controls LUM SET LINK P. ON DELAY settingsPerform Steps 1-2 of VIDEO WALL, then OSD On Screen Display ControlsREPEAT TIMER REPTR OSD On Screen Display ControlsPerform Steps 1-2 of VIDEO WALL, then 00H01M 00H02M 00H03M .... 04H14M 04H15M 6. Once the setting is completedREPTR TIME settings OSD On Screen Display Controls2. To select “DEUTSCH” » Language Settings MenuSetting the language for the menus 3. Once the setting is completed2. To select “3.58NTSC” Setting the video signal formatOSD On Screen Display Controls 3. Once the setting is completed » Video Standard MenuPress the MENU button on the remote control to display the » Signal Info. MenuChecking the frequencies, polarities of input signals, and resolution 3. Once you have checked the frequencyConnections Type of connector D-Sub 9-pin maleEXTERNAL CONTROLS ApplicationUnit ID 1 and Unit ID CommandCommunication Format External ControlsCMD2 Command Reference ListExternal Controls CMD1External Controls 01 POWER ON02 POWER OFF 03 INPUT SWITCH CHANGE07 CONTRAST GAIN DATA 04 VOLUME GAIN DATA05 AUDIO MUTE ON 06 AUDIO MUTE OFF08 BRIGHT GAIN DATA 09 SHARPNESS GAIN DATAExternal Controls 10 COLOR GAIN DATA 11 TINT GAIN DATAExternal Controls 12 IMAGE MEM. SELECT 13 WHITE BAL. SELECTExternal Controls 14 RED GAIN DATA 15 GREEN GAIN DATAExternal Controls 17 VID NR MODE SET 16 BLUE GAIN DATAExternal Controls ODH +13 18 BASS GAIN DATA19 TREBLE GAIN DATA External Controls20 BALANCE Gain Data 21 ASPECT RATIO SELECTExternal Controls 22 V SHIFT GAIN DATA 23 H SHIFT GAIN DATAExternal Controls 24 V-SIZE GAIN DATA 25 H-SIZE GAIN DATAExternal Controls 26 PHASE GAIN DATA 27 CLOCK GAIN DATAExternal Controls External Controls 28 OSD SELECT29 OSD ADJ. GAIN DATA OperationExternal Controls 32 CINEMA MODE SET30 AUTO OFF SELECT 31 SIDEBAR LEV. SET33 RGB3 ADJ. SELECT 34 PIXL PROTECT SETExternal Controls STANDBY 35 INVERSE SET36 IMAGE SWEEP SET External ControlsExample 37 FACTORY38 AUDIO SELECT SET External Controls39 BNC SELECT 41 RGB SELECTExternal Controls 41 HD SELECT 42 LANGUAGE SELECTExternal Controls Horizontal sync polarity 43 VIDEO STANDARD SELECT44 FREQUENCY REQUEST External ControlsACK continued 45 INPUT MODE REQUESTRESOLUTION External Controls46 VIDEO ADJ REQUEST External ControlsACK continued 47 AUTO SELECT REQUEST External ControlsACK continued 48 FAILURE MODE REQUEST 49 MODEL NAME REQUESTExternal Controls Computer input signals supported by this system TABLE OF SIGNALS SUPPORTEDSync Polarity Table of Signals Supported continuedScreen Mode Model7 Other screen modes LTR BOX and I-WIDE are available as well With digital input some signals are not acceptedIf you are connecting a composite sync signal, use the HD terminal Table of Signals Supported continuedREMEDY TROUBLESHOOTINGSYMPTOM CHECKSREMEDY Troubleshooting continuedSYMPTOM CHECKSVP-60 VP-42VP-42HD VP-50VP-42HD Specifications continuedLimited Warranty VP-421.665 40.301 DIMENSIONSVP-42 / VP-42HD 4.899 1.4742.172 48.407 DimensionsVP-50 3.941 1.6674.855 1.903 VP-60Dimensions 2.227 58.117Ph 510 324-5900 / Fax 510 1-888-4-VIDIKRON RUMA-010550 4-04 VIDIKRON 2900 Faber Street Union City, CA