Manuals / Vidikron / Computer Equipment / Computer Monitor

Vidikron VP-42HD, VP-60, VP-50 owner manual Auto Select Request, External Controls, ACK continued

Models: VP-42 VP-50 VP-42HD VP-60

1 117

Download 117 pages 32.87 Kb

Page 105

Image 105

External Controls

ACK continued ...

7FH	60H	80H	45H	0CH	DATA00 to DATA11	CKS

DATA07:	BRIGHT Gain				E0H: -32

					FFH: -01
					00H: 0
					01H: +01

					20H: +32
DATA08:	RED Gain (Drive)				D8H: -40

					FFH: -1
					00H: 0

					IEH: +30
DATA09:	GREEN Gain (Drive)				D8H: -40

					FFH: -1
					00H: 0

					IEH: +30
DATA10:	BLUE Gain (Drive)				D8H: -40

					FFH: -1
					00H: 0

					IEH: +30
DATA11:	WHITE BAL.				00H: 5400K
					01H: 6500K
					02H: 8500K
					03H: 9300K

47 AUTO SELECT REQUEST

Function

The external control equipment inquires the current combinations of audio and video inputs for the plasma monitor.

Transmission Data

1FH	80H	60H	6FH	00H	CKS

ACK

7FH	60H	80H	6FH	03H	DATA00	DATA01	DATA02	CKS

DATA00:	AUDIO 1
	01H - 0CH: VISUAL INPUT DATA
DATA01:	AUDIO 2
	01H - 0CH: VISUAL INPUT DATA
DATA02:	AUDIO 3
	01H - 0CH: VISUAL INPUT DATA
	VISUAL INPUT DATA
	01H:	Video 1
	02H:	Video 2
	03H:	Video 3
	05H:	HD (HD1 or DTV or DTV1)
	06H:	HD2 (DTV2)
	07H:	RGB 1 /PC1
	08H:	RGB 2 /PC2
	0CH:	RGB 3 /PC3

104

Page 105

Image 105

Vidikron VP-42HD, VP-60, VP-50 owner manual Auto Select Request, External Controls, ACK continued

Contents

VP-42 / VP-42HD / VP-50 / VP-60 Owner’s Manual Limited Warranty TABLE OF CONTENTSHow to Attach Options to the Plasma Monitor InstallationINTRODUCTION » Introduction to the Vidikron PlasmaViewVP-42 / VP-42HD / VP-50 / VP-60 Flat Panel Display Monitor Contents of the package » The features you’ll enjoy includeIntroduction OptionsIMPORTANT INFORMATION » PrecautionsImportant Information » Warnings and Safety PrecautionsImportant Information » To avoid damage and prolong operating life» Plasma monitor cleaning procedure NOTE BURN-INS ARE NOT COVERED BY THE WARRANTYImportant Information LIMITED WARRANTY WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTYWHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY Limited Warranty EFFECTIVE WARRANTY DATEIMPORTANT WARRANTY REGISTRATION CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICEVIDIKRON ADDITIONAL INFORMATIONLimited Warranty Attn Customer Service Department 2900 Faber Street Union City, CAVentilation Requirements for enclosure mounting HOW TO ATTACH OPTIONS TO THE PLASMA MONITOR3 POWER 1 POWER6 VOLUME DOWN and UP PART NAMES AND FUNCTIONSA AC IN » Rear View / Terminal BoardC VIDEO 1,2,3 BNC, RCA, S-Video D AUDIO1, AUDIO2, AUDIO3Part Names and Functions Rear View / Terminal BoardCb/Pb G/ B/ Y Cb/Pb10 VOLUME + » Remote Control1 ON/OFF 2 CURSOR12 DISPLAY Remote Control continued13 LIGHT Part Names and FunctionsPart Names and Functions » Battery Installation and Replacement1. Press and open the cover 2. Align the batteries according to the + and» Handling the remote control » Operating RangePart Names and Functions HD Set Top Box with DVI HDCP Output, Computer, other devices INSTALLATION» Connecting Your PC or Macintosh Computer Installation» Connecting Your VCR or Laser Disc Player » Connecting Your DVD PlayerInstallation » Pin Configuration and Signal of the RGB 3 Connector DVI Connector » Pin Assignment and Signal Levels for 15 pin RGB analogInstallation Pin No» VOLUME » POWERTo adjust the sound volume To cancel the soundTo set the timer off » TIMER OFFTo cancel the off timer Basic OperationsLTR BOX mode When viewing videos or DVDsSTD 43 mode ANAMPHC modeINTELLIWIDE mode Aspect Ratio ControlsActive Image Area » Aspect Ratio Operation with Computer Signals 2. Within 3 secondsAspect Ratio Controls OSD On Screen Display Controls » Menu Operations Default OSD On Screen Display ControlsReset ADJUSTDefault AUDIO SETUPDefault ResetReset DefaultSETTING SETTINGReset DefaultSIGNAL INFO OSD On Screen Display ControlsAdjusting the picture » Picture Adjust MenuPress the MENU button on the remote control to display the If “CAN NOT ADJUST” appears4. Once the adjustment is completed Setting the picture mode according to the brightness of the room3. To set to “FACTORY” Press the MENU button on the remote control to display theReducing noise in the picture 4. Once the setting is completedPress the MENU button on the remote control to display the MAIN MENU on the screen, thenAdjusting the color to the desired level Setting the White BalancePerform the following operations Perform Steps 1-3 of WHITE BAL., thenChanging the Gamma Curve 7. Once the adjustment is completedAdjusting the white balance OSD On Screen Display Controls4. Once the setting is completed Making the Dither adjustments4. Once the setting is completed OSD On Screen Display Controls5. Once the setting is completed Adjusting the colorsCOLOR CHART Perform the following operationsTo continue adjusting the audio » Audio Setup MenuPress the MENU button on the remote control to display the COLOR CHART settingsSetting the allocation of the audio connectors Set “AUDIO INPUT” on the AUDIO SETUP menu correctly3. To set the AUDIO INPUT1 to “VIDEO2” If “CAN NOT ADJUST” appearsTo select a mode » Image Options Settings Menu2. To adjust the vertical position To continue making other computer image adjustmentsAdjusting the COMPUTER OSD On Screen Display Controls 4. Once all adjustments are completedAdjusting the position of the image Restoring the factory defaults settingsSetting the on-screen menu » SETTING 1 Settings Menu4. To set the DISPLAY OSD to “OFF” Press the MENU button on the remote control to display the3. To set the BNC INPUT mode to “COMP” Setting the BNC connectorsPress the MENU button on the remote control to display the 4. Once the setting is completedPress the MENU button on the remote control to display the 3. To set the RGB select mode to “AUTO”4. Once the setting is completed OSD On Screen Display ControlsPress the MENU button on the remote control to display the 3. To set the HD TYPE mode to “1080B”4. Once the setting is completed Restoring the factory default settings3. To set the INPUT SKIP mode to “OFF” Setting the Input SkipPress the MENU button on the remote control to display the 4. Once the setting is completed4. Once the setting is completed Resetting to the default valuesSETTING OSD On Screen Display ControlsSetting the Auto Off for computer images » SETTING 2 Menu3. To turn the Auto Off function on 4. Once the setting is completedSetting the picture to suit the movie POWER / STANDBY indicatorOSD On Screen Display Controls 3. To set the CINEMA MODE to “OFF” 4. Once the setting is completedPerform Steps 1-2 of PIXL PROTECT, then Dynamic Pixel Protection PIXL PROTECT Reducing burn-in of the screen4. Once the setting is completed OSD On Screen Display ControlsExample Setting ”ORBITER” to “AUTO1” ORBITERLUM. SETTING ORBITER settingsPerform Steps 1-3 of ORBITER, then Adjust the ORBITER function manuallyINVERSE OSD On Screen Display Controls6. Once the setting is completed Setting the time for INVERSE/WHITEPerform Steps 1-3 of INVERSE, then OSD On Screen Display ControlsIMAGE SWEEP Setting the time for IMAGE SWEEP Set a time duration and the speedPerform Steps 1-3 of IMAGE SWEEP, then OSD On Screen Display ControlsSOFTEN Setting the Sidebar Lev. for the sides of the screen6. Once the setting is completed OSD On Screen Display Controls3. To adjust the “SIDEBAR LEV.” Setting the screen size for S1/S2 video inputOSD On Screen Display Controls 4. Once the setting is completed OSD On Screen Display Controls 3.To set PLUG/PLAY mode to “STB/DVD”Perform the following operations DVI TYPEUsing the timer » SETTING 3 MenuPRESET TIME Perform Steps 1-2 of TIMER, then5. Once the setting is completed The mode switches as follows each time the or buttons is pressedPRESET TIME settings DAYLIGHT SAVING TIMEPerform Steps 1-2 of TIMER, then PROGRAM TIMER6. Once the setting is completed OSD On Screen Display Controls3. To set the DEFAULT INPUT to “VIDEO2” Setting the DEFAULT INPUTPROGRAM TIMER settings To reset the program4. Once the setting is completed Enabling/disabling the front panel controlsOSD On Screen Display Controls Perform the following operations3. To set the CONTROL LOCK to “ON” 3. To set the IR ENABLE to “OFF”4. Once the setting is completed CONTROL LOCK settingsLoop Out Setting OSD On Screen Display Controls 4. Once the setting is completed3. To set the LOOP OUT to “ON” IR ENABLE settings3. To set the ID NUMBER to “O2” ID Number SettingPerform the following operations OSD On Screen Display Controls4. Once the setting is completed Video Wall SettingOSD On Screen Display Controls Perform the following operationsPerform Steps 1-2 of VIDEO WALL, then DIVIDERVIDEO WALL POSITION OSD On Screen Display ControlsAUTO ID DISP. MODEVIDEO WALL POSITION settings DISP. MODE SETTINGSOSD On Screen Display Controls Set the ID number for the No. 1 display on ID NUMBER menuP. ON DELAY Power on delay 6. Once the setting is completedOSD On Screen Display Controls Perform Steps 1-2 of VIDEO WALL, then P. ON DELAY settingsOSD On Screen Display Controls LUM SET LINKREPEAT TIMER REPTR OSD On Screen Display ControlsPerform Steps 1-2 of VIDEO WALL, then REPTR TIME settings 6. Once the setting is completedOSD On Screen Display Controls 00H01M 00H02M 00H03M .... 04H14M 04H15MSetting the language for the menus » Language Settings Menu3. Once the setting is completed 2. To select “DEUTSCH”OSD On Screen Display Controls 3. Once the setting is completed Setting the video signal format» Video Standard Menu 2. To select “3.58NTSC”Checking the frequencies, polarities of input signals, and resolution » Signal Info. Menu3. Once you have checked the frequency Press the MENU button on the remote control to display theEXTERNAL CONTROLS Type of connector D-Sub 9-pin maleApplication ConnectionsCommunication Format CommandExternal Controls Unit ID 1 and Unit IDExternal Controls Command Reference ListCMD1 CMD202 POWER OFF 01 POWER ON03 INPUT SWITCH CHANGE External Controls05 AUDIO MUTE ON 04 VOLUME GAIN DATA06 AUDIO MUTE OFF 07 CONTRAST GAIN DATA08 BRIGHT GAIN DATA 09 SHARPNESS GAIN DATAExternal Controls 10 COLOR GAIN DATA 11 TINT GAIN DATAExternal Controls 12 IMAGE MEM. SELECT 13 WHITE BAL. SELECTExternal Controls 14 RED GAIN DATA 15 GREEN GAIN DATAExternal Controls 17 VID NR MODE SET 16 BLUE GAIN DATAExternal Controls 19 TREBLE GAIN DATA 18 BASS GAIN DATAExternal Controls ODH +1320 BALANCE Gain Data 21 ASPECT RATIO SELECTExternal Controls 22 V SHIFT GAIN DATA 23 H SHIFT GAIN DATAExternal Controls 24 V-SIZE GAIN DATA 25 H-SIZE GAIN DATAExternal Controls 26 PHASE GAIN DATA 27 CLOCK GAIN DATAExternal Controls 29 OSD ADJ. GAIN DATA 28 OSD SELECTOperation External Controls30 AUTO OFF SELECT 32 CINEMA MODE SET31 SIDEBAR LEV. SET External Controls33 RGB3 ADJ. SELECT 34 PIXL PROTECT SETExternal Controls 36 IMAGE SWEEP SET 35 INVERSE SETExternal Controls STANDBY38 AUDIO SELECT SET 37 FACTORYExternal Controls Example39 BNC SELECT 41 RGB SELECTExternal Controls 41 HD SELECT 42 LANGUAGE SELECTExternal Controls 44 FREQUENCY REQUEST 43 VIDEO STANDARD SELECTExternal Controls Horizontal sync polarityRESOLUTION 45 INPUT MODE REQUESTExternal Controls ACK continued46 VIDEO ADJ REQUEST External ControlsACK continued 47 AUTO SELECT REQUEST External ControlsACK continued 48 FAILURE MODE REQUEST 49 MODEL NAME REQUESTExternal Controls Computer input signals supported by this system TABLE OF SIGNALS SUPPORTEDScreen Mode Table of Signals Supported continuedModel Sync PolarityIf you are connecting a composite sync signal, use the HD terminal With digital input some signals are not acceptedTable of Signals Supported continued 7 Other screen modes LTR BOX and I-WIDE are available as wellSYMPTOM TROUBLESHOOTINGCHECKS REMEDYSYMPTOM Troubleshooting continuedCHECKS REMEDYVP-42HD VP-42VP-50 VP-60Limited Warranty Specifications continuedVP-42 VP-42HDVP-42 / VP-42HD DIMENSIONS4.899 1.474 1.665 40.301VP-50 Dimensions3.941 1.667 2.172 48.407Dimensions VP-602.227 58.117 4.855 1.903Ph 510 324-5900 / Fax 510 1-888-4-VIDIKRON RUMA-010550 4-04 VIDIKRON 2900 Faber Street Union City, CA