Manuals / Vidikron / Computer Equipment / Computer Monitor

Vidikron VP-60, VP-42HD, VP-50 Osd Select, Osd Adj. Gain Data, Operation, External Controls

Models: VP-42 VP-50 VP-42HD VP-60

1 117

Download 117 pages 32.87 Kb

Page 95

28 OSD SELECT

External Controls

28 OSD SELECT

Function

The external control equipment switches on or off the on-screen display (OSD) of the plasma monitor.

Transmission Data

DFH	80H	60H	58H	01H	DATA00	CKS

DATA00: 01H: On-Screen display On 02H: On-Screen display Off

ACK

7FH	60H	80H	58H	01H	DATA00	CKS

DATA00: 01H: On-Screen diaplay On 02H: On-Screen display Off

On-Screen display On/Off is equivalent to the OSD menu item under the FUNCTION menu.

*Operation is as described in the table below.

		On-Screen Display (OSD)
	Display of items and			Volume display, input display,
Operation	adjustments on the menu			and screen display
	When screen		When screen	When screen		When screen

	display is ON		display is	display is		display is
			OFF	ON		OFF
Remote control	Yes		Yes	Yes		No
operation

Personal computer	No		No	Yes		No
control operation

29 OSD ADJ. GAIN DATA

Function

The external control equipment sets the position of the OSD menu of the plasma monitor.

Transmission Data

DFH	80H	60H	1AH	02H	DATA00	DATA01	CKS

DATA00:	OSD ADJ. Gain Flag					02H
DATA01:	01H: 1
	│
	06H: 6

ACK

7FH	60H	80H	1AH	01H	DATA00	CKS

DATA00:	OSD ADJ. Gain Flag					02H

94

Image 95

Vidikron VP-60, VP-42HD, VP-50 Osd Select, Osd Adj. Gain Data, Operation, External Controls, On-Screen Display OSD

Contents

VP-42 / VP-42HD / VP-50 / VP-60 Owner’s Manual Installation TABLE OF CONTENTSLimited Warranty How to Attach Options to the Plasma MonitorVP-42 / VP-42HD / VP-50 / VP-60 Flat Panel Display Monitor INTRODUCTION» Introduction to the Vidikron PlasmaView Options » The features you’ll enjoy includeContents of the package IntroductionIMPORTANT INFORMATION » PrecautionsImportant Information » Warnings and Safety PrecautionsImportant Information » To avoid damage and prolong operating lifeImportant Information » Plasma monitor cleaning procedureNOTE BURN-INS ARE NOT COVERED BY THE WARRANTY WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY LIMITED WARRANTYWHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE EFFECTIVE WARRANTY DATELimited Warranty IMPORTANT WARRANTY REGISTRATIONAttn Customer Service Department 2900 Faber Street Union City, CA ADDITIONAL INFORMATIONVIDIKRON Limited WarrantyVentilation Requirements for enclosure mounting HOW TO ATTACH OPTIONS TO THE PLASMA MONITORPART NAMES AND FUNCTIONS 1 POWER3 POWER 6 VOLUME DOWN and UPD AUDIO1, AUDIO2, AUDIO3 » Rear View / Terminal BoardA AC IN C VIDEO 1,2,3 BNC, RCA, S-VideoG/ B/ Y Cb/Pb Rear View / Terminal BoardPart Names and Functions Cb/Pb2 CURSOR » Remote Control10 VOLUME + 1 ON/OFFPart Names and Functions Remote Control continued12 DISPLAY 13 LIGHT2. Align the batteries according to the + and » Battery Installation and ReplacementPart Names and Functions 1. Press and open the coverPart Names and Functions » Handling the remote control» Operating Range HD Set Top Box with DVI HDCP Output, Computer, other devices INSTALLATION» Connecting Your PC or Macintosh Computer InstallationInstallation » Connecting Your VCR or Laser Disc Player» Connecting Your DVD Player Pin No » Pin Assignment and Signal Levels for 15 pin RGB analog» Pin Configuration and Signal of the RGB 3 Connector DVI Connector InstallationTo cancel the sound » POWER» VOLUME To adjust the sound volumeBasic Operations » TIMER OFFTo set the timer off To cancel the off timerANAMPHC mode When viewing videos or DVDsLTR BOX mode STD 43 modeActive Image Area INTELLIWIDE modeAspect Ratio Controls Aspect Ratio Controls » Aspect Ratio Operation with Computer Signals2. Within 3 seconds OSD On Screen Display Controls » Menu Operations ADJUST OSD On Screen Display ControlsDefault ResetReset AUDIO SETUPDefault DefaultSETTING DefaultReset SETTINGOSD On Screen Display Controls DefaultReset SIGNAL INFOIf “CAN NOT ADJUST” appears » Picture Adjust MenuAdjusting the picture Press the MENU button on the remote control to display thePress the MENU button on the remote control to display the Setting the picture mode according to the brightness of the room4. Once the adjustment is completed 3. To set to “FACTORY”MAIN MENU on the screen, then 4. Once the setting is completedReducing noise in the picture Press the MENU button on the remote control to display thePerform Steps 1-3 of WHITE BAL., then Setting the White BalanceAdjusting the color to the desired level Perform the following operationsOSD On Screen Display Controls 7. Once the adjustment is completedChanging the Gamma Curve Adjusting the white balanceOSD On Screen Display Controls Making the Dither adjustments4. Once the setting is completed 4. Once the setting is completedPerform the following operations Adjusting the colors5. Once the setting is completed COLOR CHARTCOLOR CHART settings » Audio Setup MenuTo continue adjusting the audio Press the MENU button on the remote control to display theIf “CAN NOT ADJUST” appears Set “AUDIO INPUT” on the AUDIO SETUP menu correctlySetting the allocation of the audio connectors 3. To set the AUDIO INPUT1 to “VIDEO2”To continue making other computer image adjustments » Image Options Settings MenuTo select a mode 2. To adjust the vertical positionRestoring the factory defaults settings OSD On Screen Display Controls 4. Once all adjustments are completedAdjusting the COMPUTER Adjusting the position of the imagePress the MENU button on the remote control to display the » SETTING 1 Settings MenuSetting the on-screen menu 4. To set the DISPLAY OSD to “OFF”4. Once the setting is completed Setting the BNC connectors3. To set the BNC INPUT mode to “COMP” Press the MENU button on the remote control to display theOSD On Screen Display Controls 3. To set the RGB select mode to “AUTO”Press the MENU button on the remote control to display the 4. Once the setting is completedRestoring the factory default settings 3. To set the HD TYPE mode to “1080B”Press the MENU button on the remote control to display the 4. Once the setting is completed4. Once the setting is completed Setting the Input Skip3. To set the INPUT SKIP mode to “OFF” Press the MENU button on the remote control to display theOSD On Screen Display Controls Resetting to the default values4. Once the setting is completed SETTING4. Once the setting is completed » SETTING 2 MenuSetting the Auto Off for computer images 3. To turn the Auto Off function on4. Once the setting is completed POWER / STANDBY indicatorSetting the picture to suit the movie OSD On Screen Display Controls 3. To set the CINEMA MODE to “OFF”OSD On Screen Display Controls Dynamic Pixel Protection PIXL PROTECT Reducing burn-in of the screenPerform Steps 1-2 of PIXL PROTECT, then 4. Once the setting is completedORBITER settings ORBITERExample Setting ”ORBITER” to “AUTO1” LUM. SETTINGOSD On Screen Display Controls Adjust the ORBITER function manuallyPerform Steps 1-3 of ORBITER, then INVERSEOSD On Screen Display Controls Setting the time for INVERSE/WHITE6. Once the setting is completed Perform Steps 1-3 of INVERSE, thenOSD On Screen Display Controls Setting the time for IMAGE SWEEP Set a time duration and the speedIMAGE SWEEP Perform Steps 1-3 of IMAGE SWEEP, thenOSD On Screen Display Controls Setting the Sidebar Lev. for the sides of the screenSOFTEN 6. Once the setting is completedOSD On Screen Display Controls 3. To adjust the “SIDEBAR LEV.”Setting the screen size for S1/S2 video input DVI TYPE OSD On Screen Display Controls 3.To set PLUG/PLAY mode to “STB/DVD”4. Once the setting is completed Perform the following operationsPerform Steps 1-2 of TIMER, then » SETTING 3 MenuUsing the timer PRESET TIMEDAYLIGHT SAVING TIME The mode switches as follows each time the or buttons is pressed5. Once the setting is completed PRESET TIME settingsOSD On Screen Display Controls PROGRAM TIMERPerform Steps 1-2 of TIMER, then 6. Once the setting is completedTo reset the program Setting the DEFAULT INPUT3. To set the DEFAULT INPUT to “VIDEO2” PROGRAM TIMER settingsPerform the following operations Enabling/disabling the front panel controls4. Once the setting is completed OSD On Screen Display ControlsCONTROL LOCK settings 3. To set the IR ENABLE to “OFF”3. To set the CONTROL LOCK to “ON” 4. Once the setting is completedIR ENABLE settings OSD On Screen Display Controls 4. Once the setting is completedLoop Out Setting 3. To set the LOOP OUT to “ON”OSD On Screen Display Controls ID Number Setting3. To set the ID NUMBER to “O2” Perform the following operationsPerform the following operations Video Wall Setting4. Once the setting is completed OSD On Screen Display ControlsOSD On Screen Display Controls DIVIDERPerform Steps 1-2 of VIDEO WALL, then VIDEO WALL POSITIONDISP. MODE SETTINGS DISP. MODEAUTO ID VIDEO WALL POSITION settingsOSD On Screen Display Controls Set the ID number for the No. 1 display on ID NUMBER menuOSD On Screen Display Controls P. ON DELAY Power on delay6. Once the setting is completed LUM SET LINK P. ON DELAY settingsPerform Steps 1-2 of VIDEO WALL, then OSD On Screen Display ControlsPerform Steps 1-2 of VIDEO WALL, then REPEAT TIMER REPTROSD On Screen Display Controls 00H01M 00H02M 00H03M .... 04H14M 04H15M 6. Once the setting is completedREPTR TIME settings OSD On Screen Display Controls2. To select “DEUTSCH” » Language Settings MenuSetting the language for the menus 3. Once the setting is completed2. To select “3.58NTSC” Setting the video signal formatOSD On Screen Display Controls 3. Once the setting is completed » Video Standard MenuPress the MENU button on the remote control to display the » Signal Info. MenuChecking the frequencies, polarities of input signals, and resolution 3. Once you have checked the frequencyConnections Type of connector D-Sub 9-pin maleEXTERNAL CONTROLS ApplicationUnit ID 1 and Unit ID CommandCommunication Format External ControlsCMD2 Command Reference ListExternal Controls CMD1External Controls 01 POWER ON02 POWER OFF 03 INPUT SWITCH CHANGE07 CONTRAST GAIN DATA 04 VOLUME GAIN DATA05 AUDIO MUTE ON 06 AUDIO MUTE OFFExternal Controls 08 BRIGHT GAIN DATA09 SHARPNESS GAIN DATA External Controls 10 COLOR GAIN DATA11 TINT GAIN DATA External Controls 12 IMAGE MEM. SELECT13 WHITE BAL. SELECT External Controls 14 RED GAIN DATA15 GREEN GAIN DATA External Controls 17 VID NR MODE SET16 BLUE GAIN DATA ODH +13 18 BASS GAIN DATA19 TREBLE GAIN DATA External ControlsExternal Controls 20 BALANCE Gain Data21 ASPECT RATIO SELECT External Controls 22 V SHIFT GAIN DATA23 H SHIFT GAIN DATA External Controls 24 V-SIZE GAIN DATA25 H-SIZE GAIN DATA External Controls 26 PHASE GAIN DATA27 CLOCK GAIN DATA External Controls 28 OSD SELECT29 OSD ADJ. GAIN DATA OperationExternal Controls 32 CINEMA MODE SET30 AUTO OFF SELECT 31 SIDEBAR LEV. SETExternal Controls 33 RGB3 ADJ. SELECT34 PIXL PROTECT SET STANDBY 35 INVERSE SET36 IMAGE SWEEP SET External ControlsExample 37 FACTORY38 AUDIO SELECT SET External ControlsExternal Controls 39 BNC SELECT41 RGB SELECT External Controls 41 HD SELECT42 LANGUAGE SELECT Horizontal sync polarity 43 VIDEO STANDARD SELECT44 FREQUENCY REQUEST External ControlsACK continued 45 INPUT MODE REQUESTRESOLUTION External ControlsACK continued 46 VIDEO ADJ REQUESTExternal Controls ACK continued 47 AUTO SELECT REQUESTExternal Controls External Controls 48 FAILURE MODE REQUEST49 MODEL NAME REQUEST Computer input signals supported by this system TABLE OF SIGNALS SUPPORTEDSync Polarity Table of Signals Supported continuedScreen Mode Model7 Other screen modes LTR BOX and I-WIDE are available as well With digital input some signals are not acceptedIf you are connecting a composite sync signal, use the HD terminal Table of Signals Supported continuedREMEDY TROUBLESHOOTINGSYMPTOM CHECKSREMEDY Troubleshooting continuedSYMPTOM CHECKSVP-60 VP-42VP-42HD VP-50VP-42HD Specifications continuedLimited Warranty VP-421.665 40.301 DIMENSIONSVP-42 / VP-42HD 4.899 1.4742.172 48.407 DimensionsVP-50 3.941 1.6674.855 1.903 VP-60Dimensions 2.227 58.117Ph 510 324-5900 / Fax 510 1-888-4-VIDIKRON RUMA-010550 4-04 VIDIKRON 2900 Faber Street Union City, CA