Vidikron VP-42HD, VP-60, VP-50 P. ON DELAY Power on delay, OSD On Screen Display Controls

OSD (On Screen Display) Controls

4. Use the and buttons to select “V SHIFT”.

IMAGE OPTIONS
ASPECT RATIO		:	I-WIDE
V SHIFT			0
H SHIFT			0
V - SIZE			0
H - SIZE			0
COMPUTER		:	OFF
FINE PICTURE			0
PICTURE ADJ.			0
SEL.	ADJ.		EXIT EXIT
5. Adjust using the		and	buttons.
V SHIFT			0

*If neither the and button is pressed within 5 seconds, the current setting is set and the previous screen reappears.

6.Once the setting is completed...

Press the EXIT button to return to the VIDEO WALL screen.

Information

■IMAGE ADJUST settings These are the same functions as the IMAGE ADJUST menu on page xx.

P. ON DELAY (Power on delay)

Use this funciton to activate power-on delay.

Turn on the AUTO ID before the following operations. Example: Setting “ON”

Perform Steps 1-2 of VIDEO WALL, then...

3.Use the and buttons to select “P. ON DELAY”.

4.Use the and buttons to select “ON”.

The mode switches as follows each time the or button is pressed: OFF ON

VIDEO WALL

DIVIDER	:	1
POSITON
DISP. MODE	:	BLANK
AUTO ID	:	OFF
IMAGE ADJUST
P. ON DELAY	:	ON
LUM SET LINK	:	OFF
REPTR TIME	:	OFF
SEL.	ADJ.	EXIT EXIT

72