Vidikron VP-60, VP-42HD, VP-50 Adjusting the colors, Once the setting is completed, Color Chart

Information

■ DITHER settings

AUTO	Will automatically appraise the picture
	and make adjustments.
STILL	Will apply the dither method suitable
	for still pictures.
MOTION	Will apply the dither method suitable
	for motion pictures.
DIFFUSE	Will apply the error diffusion method.

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that this also restores other settings to the factory defaults.

Adjusting the colors

Use this procedure to adjust hue and color density for red, green, blue, yellow, magenta and cyan. Such adjustments will not affect the other colors. You can accentuate the green color of trees, the blue of the sky, etc.

Example: Adjusting the color tune for blue

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “PICTURE ADJUST”, then press the MENU button. The “PICTURE ADJUST” screen appears.

OSD (On Screen Display) Controls

2.Use the ▲ and ▼ buttons to select “COLOR CHART”, then press the MENU button. The “COLOR CHART” screen appears.

3.Use the ▲ and ▼ buttons to select “BLUE”.

4.Adjust using the ◄ and ► buttons.

COLOR CHART

RED	Y		M	0
GREEN	C		Y	0
BLUE	M		C	0
YELLOW	G		R	0
MAGENTA	R		B	0
CYAN	B		G	0
RESET	:	OFF
SEL.	ADJ.	EXIT EXIT

*If neither the ◄ or ► button is pressed within 5 seconds, the current selection is set and the previous screen reappears.

To continue making other adjustments...

Repeat from step 3.

5.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

39