Vidikron VP-60, VP-42HD, VP-50 Reducing noise in the picture, Once the setting is completed

Reducing noise in the picture

Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor.

Example: Setting “VID NR-3”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

1.Use the and buttons to select “PICTURE ADJUST”, then press the MENU button. The “PICTURE ADJUST” screen appears.

2.Use the and buttons to select “VIDEO NR”.

�����������������������������

���������		�	��������������
�����������		�	��������������
����������		�	�
������	�	�	�
�����	�	�	�
�����������		���������������

��������� ���������������

�����������������

OSD (On Screen Display) Controls

3. Use the and buttons to select “VID NR3”.

The mode switches as follows when the and buttons are pressed:

OFF VID NR-1 VID NR-2 VID NR-3

VID NR : VID NR3

*If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears.

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information:

■VIDEO NR

*“NR” stands for Noise Reduction.

*This function reduces noise in the picture.

■Types of noise reduction

There are three types of noise reduction. Each has a different level of noise reduction. The effect becomes stronger as the number increases (in the order VID NR1 VID NR2 VID NR3).

OFF ....... Turns the noise reduction function off.

35