Vidikron VP-50, VP-60 Divider, Set the 2x2 or 3x3 video wall Example Setting, Video Wall Position

Information

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

DIVIDER

Set the 2x2 or 3x3 video wall.

Example: Setting “4”

Perform Steps 1-2 of VIDEO WALL, then...

3.Use the and buttons to select “DIVIDER”.

4.Use the and buttons to select “4”.

The mode switches as follows each time the or button is pressed:

OFF 1 4 9

VIDEO WALL

DIVIDER	:	4
POSITON
DISP. MODE	: SPLIT
AUTO ID	:	OFF
IMAGE ADJUST
P. ON DELAY	:	OFF
LUM SET LINK	:	OFF
REPTR TIME	:	OFF
SEL.	ADJ.	EXIT EXIT

OSD (On Screen Display) Controls

Information

■DIVIDER settings

OFF, 1	1	Screen (Matrix display function does not work)
4	4	Screens (2x2 video wall)
9	9	Screens (3x3 video wall)

* When you select “4” or “9”, set the VIDEO WALL POSITION.

VIDEO WALL POSITION

Set the position of each display.

Example: Setting “4”

Perform Steps 1-2 of VIDEO WALL, then...

3.Use the and buttons to select “POSITION”, then press the MENU button. The “VIDEO WALL POSITION” screen appears.

4.Use the and buttons to select “NO. 4”.

The mode switches as follows each time the or button is pressed:

• 4 Screens

NO. 1 NO. 2 NO. 3 NO. 4

•9 Screens

NO. 7 NO. 8 NO. 14 NO. 15

69