To set the Control Lock to on | Vidikron VP-50, VP-60, VP-42HD

3.To set the CONTROL LOCK to “ON”...

Use the and buttons to select “ON”, then press the MENU button.

The mode switches as follows each time the or button is pressed: OFF ON

SETTING 3			3 / 3
PREVIOUS PG.
TIMER
INPUT SELECT	: LAST
CONTROL LOCK :		ON
IR ENABLE	:	ON
LOOP OUT	:	OFF
ID NUMBER	:	ALL
VIDEO WALL
SEL.	ADJ.	EXIT EXIT

4.Once the setting is completed ...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

Information

■CONTROL LOCK settings

ON	Disables the buttons on the front panel.
OFF	Enables the buttons on the front panel.

*Even when the CONTROL LOCK is set, the POWER switch will not be locked.

*This becomes effective when the on-screen menu goes out.

OSD (On Screen Display) Controls

Enabling/disabling remote control wireless transmission This function enables/disables remote control wireless transmission.

Example: Setting “OFF” Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “SETTING 3”, then press the MENU button. The “SETTING 3” screen appears.

2.Use the and buttons to select “IR ENABLE”.

3.To set the IR ENABLE to “OFF”...

Use the and buttons to select “OFF”, then press the MENU button.

The mode switches as follows each time the or button is pressed: OFF ON

SETTING 3			3 / 3
PREVIOUS PG.
TIMER
INPUT SELECT	: LAST
CONTROL LOCK :		ON
IR ENABLE	:	OFF
LOOP OUT	:	OFF
ID NUMBER	:	ALL
VIDEO WALL
SEL.	ADJ.	EXIT EXIT

65

Image 66

Vidikron VP-50 To set the Control Lock to on, Example Setting OFF Perform the following operations, Control Lock settings

Contents

Page Table of Contents Introduction » The features you’ll enjoy include Contents of the packageOptions » Precautions Important Information » Warnings and Safety Precautions Important Information » To avoid damage and prolong operating life » Plasma monitor cleaning procedure Limited Warranty What is Covered Under the Terms of this Limited Warranty Important Warranty Registration Effective Warranty DateLimited Warranty RIGHTS, Limits and Exclusions Additional Information Vidikron HOW to Attach Options to the Plasma Monitor Ventilation Requirements for enclosure mounting Part Names and Functions » Front View » Rear View / Terminal Board AUDIO1, AUDIO2, AUDIO3External Control Rear View / Terminal Board Y Cb/Pb » Remote Control Display Remote ControlDisplays the source settings on the screen Light » Battery Installation and Replacement » Handling the remote control » Operating Range Installation Video Installation » Connecting Your PC or Macintosh Computer » Connecting Your VCR or Laser Disc Player » Connecting Your DVD Player » Pin Assignment and Signal Levels for 15 pin RGB analog RGB Basic Operations » Power» Volume » Mute To cancel the off timer » Timer OFFTo set the timer off Basic Operations Aspect Ratio Controls » Aspect Ratio Operations Manual Intelliwide mode Aspect Ratio Controls » Aspect Ratio Operation with Computer Signals Within 3 seconds OSD On Screen Display Controls » Menu Operations Change the adjustments or the settings that are storedButton on the remote control to return to the main menu Memory. The change is stored until you change it again Adjust OSD On Screen Display Controls Image HD Type Language » Picture Adjust Menu Adjusting the pictureUse the and buttons to adjust the contrast To set to Factory Example Setting the Factory modeOnce the adjustment is completed Types of picture modes LW BLK1 Once the setting is completed Reducing noise in the pictureTypes of noise reduction Setting the White Balance See below to set White Balance AdjustAdjusting the color to the desired level Adjust the white balance using the and buttons Adjusting the white balanceChanging the Gamma Curve Making the Dither adjustments Gamma Curve settings Adjusting the colors Dither settingsDiffuse Color Chart settings » Audio Setup MenuTo continue adjusting the audio Audio setup menu Setting the allocation of the audio connectors Example Setting Audio INPUT1 to VideoTo set the Audio INPUT1 to VIDEO2 To adjust the vertical position » Image Options Settings MenuTo select a mode To continue making other computer image adjustments Restoring the factory defaults settings Adjusting the ComputerAdjusting the position of the image OFF » Setting 1 Settings Menu Setting the on-screen menuTo set the Display OSD to OFF OSD Orbiter settings Setting the BNC connectorsTo set the BNC Input mode to Comp BNC Input settings To set the RGB select mode to Auto It is set to RGB and can not be adjustedExample Setting the RGB Type mode to Auto RGB Type modes Example Setting the 1080B mode to To set the HD Type mode to 1080B Input Skip settings Setting the Input SkipTo set the Input Skip mode to OFF HD Type modes Resetting to the default values Use the and buttons to select ON, then press the Menu button » Setting 2 Menu Setting the Auto Off for computer imagesTo turn the Auto Off function on Power / Standby indicator Setting the picture to suit the movie Perform Steps 1-2 of Pixl PROTECT, then Orbiter settings Orbiter Perform Steps 1-3 of ORBITER, then Adjust the Orbiter function manuallyOrbiter Function settings Inverse Perform Steps 1-3 of INVERSE, then Setting the time for INVERSE/WHITESetting the time Press the Exit button to return to the Pixl Protect screen Example Setting Image Sweep to on Image SweepPerform Steps 1-3 of Image SWEEP, then Press the Exit button to return to the Image Sweep screen Setting the Sidebar Lev. for the sides of the screenSoften settings Soften Setting the screen size for S1/S2 video input To adjust the Sidebar LEVUse the and buttons to adjust the Sidebar LEV Sidebar LEV. settings Black Level settings S1/S2 SettingsPLUG/PLAY Settings Perform the following operations Preset Time » Setting 3 MenuUsing the timer Perform Steps 1-2 of TIMER, then DAY Preset Time settingsDaylight Saving Time Hour Program Timer Use the and buttons to select ProgramON/OFF Hour Setting the Default Input To set the Default Input to VIDEO2Use the and buttons to select VIDEO2 → RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ← Input Select settings→ RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ← Enabling/disabling the front panel controls Control Lock settings Example Setting OFF Perform the following operationsTo set the IR Enable to OFF To set the Control Lock to on Loop OUT settings Loop Out SettingIR Enable settings To set the Loop OUT to on ID Number settings ID Number SettingTo reset back to ALL Press the Clear button When the ID Number has been set Video Wall Setting Use this feature to configure a 2×2 or 3×3 video wall Divider Set the 2x2 or 3x3 video wall Example SettingSet the position of each display Example Setting Perform Steps 1-2 of Video WALL, then Press the Exit button to return to the Video Wall screen DISP. ModeVideo Wall Position settings Auto ID Auto ID settings Use On Delay Power on delay On Delay settings Video Wall Repeat Timer Reptr LUM SET Link settingsUse the and buttons to select Reptr Time Reptr Time settings Divider Source Language settings English German French Spanish Italian » Language Settings MenuSetting the language for the menus To select Deutsch Setting the video signal format » Video Standard MenuTo select 3.58NTSC » Signal Info. Menu Once you have checked the frequencyVideo standard formats Connections External ControlsApplication Communication Parameters External Controls CommandCommunication Format Unit ID 1 and Unit ID Command Reference List CMD1 CMD2 LEN Power on Power OFFInput Switch Change Audio Mute OFF Volume Gain DataAudio Mute on Contrast Gain Data Bright Gain Data Sharpness Gain Data Color Gain Data Tint Gain Data Image MEM. Select White BAL. Select RED Gain Data Green Gain Data VID NR Mode SET Blue Gain Data Bass Gain Data Treble Gain Data Balance Gain Data Aspect Ratio Select Shift Gain Data Size Gain Data Phase Gain Data Clock Gain Data OSD Select OSD ADJ. Gain Data Cinema Mode SET Auto OFF SelectSidebar LEV. SET 33 RGB3 ADJ. Select Pixl Protect SET Inverse SET Image Sweep SET Factory Audio Select SET BNC Select RGB Select HD Select Language Select100 Video Standard Select Frequency Request101 Input Mode Request 102 Video ADJ Request 103 Auto Select Request 104 Failure Mode Request Model Name Request105 Table of Signals Supported Computer input signals supported by this system106 Table of Signals Supported 107 PAL625P Troubleshooting 109 Troubleshooting 110 Specifications 111 Specifications 112 Dimensions 113 Dimensions 114 VP-60 115 RUMA-010550