Vidikron VP-60, VP-42HD Setting the time for INVERSE/WHITE, Perform Steps 1-3 of INVERSE, then

Setting the time for INVERSE/WHITE

Set a time duration.

Example: Setting to that the INVERSE mode starts in 2 hours and proceeds for one hour and a half.

Perform Steps 1-3 of INVERSE, then...

4.Use the and buttons to select “ON”, then press the MENU button. The “INVERSE/WHITE” screen appears.

5.Adjust the time using the and buttons. The mode switches as follows each time the or button is pressed:

• ACTIVE

ON 00H03M 00H06M ...... 12H42M 12H45M

• STANDBY

00H03M 00H06M		00H09M			.... 12H42M 12H45M
	INVERSE/WHITE
	ACTIVE		:	01H30M
	STANDBY	:		02H00M
	SEL.	ADJ.			EXIT EXIT

6.Once the setting is completed...

Press the EXIT button to return to the PIXL PROTECT screen.

OSD (On Screen Display) Controls

Information

■Setting the time

ACTIVE	Set the time duration for “INVERSE/
	WHITE”. When the ACTIVE is set to “ON”
	the mode will stay on.
STANDBY	Set the standby time until the “INVERSE/
	WHITE” mode starts.

*The “STANDBY” can not be set when the “ACTIVE” is ON.

*The “ACTIVE” and “STANDBY” can be set for up to 12 hours and 45 minutes in units of 3 minutes.

*When ending an ACTIVE function, the monitor will be in

STAND BY.

[Example]
ACTIVE: 01H30M
STANDBY: 02H00M
<----------	2 H ----------	><-----	1.5 H	-----><----------
		INVERSE/WHITE Start		STAND BY

■To select “ON” for the “ACTIVE”...

Set the hours of the active time to 0H and the minutes to 0M. “ON” will be displayed.

55