Vidikron VP-60, VP-42HD, VP-50 Set the ID number for the No. 1 display on ID NUMBER menu

Set the ID number for the No. 1 display on ID NUMBER menu.

Perform Steps 1-2 of VIDEO WALL, then...

3. Use the and buttons to select “AUTO ID”.

OSD (On Screen Display) Controls

Information

■AUTO ID settings

ON	Enables Audo ID function. In the case shown below, display 1
	will be set as ID 1, display 2 as ID 2, etc.

4. Use the and	buttons to select “ON”, then press the MENU
button.
The mode switches as follows each time the or button is
pressed: OFF	ON

		AUTO ID
AUTO ID		:	ON
1	2	1	2	3

REMOTE IN

REMOTE

OUT

		REMOTE
No. 1	No. 2	OUT
No. 4	No. 3		REMOTE
				IN
Display 1
			REMOTE
No. 1	No. 2		OUT
No. 4	No. 3	REMOTE
		IN
Display 4

No. 1	No. 2	REMOTE
No. 4	No. 3	OUT
Display 2
No. 1	No. 2	REMOTE
No. 4	No. 3	IN

Display 3

4	3	8	9	4
		7	6	5

WIRED CABLE

CONNECTION TURN

ADJ. EXIT EXIT

OFF ..... Disables Auto ID function.

IMAGE ADJUST

The position of the image can be adjusted and flickering of the image can be corrected.

Example: Adjusting the vertical position.

Perform Steps 1-2 of VIDEO WALL, then...

3.Use the and buttons to select “IMAGE ADJUST”, then press the MENU button. The “IMAGE ADJUST” screen ap- pears.

71