Vidikron VP-42HD Setting the Input Skip, To set the Input Skip mode to OFF, HD Type modes, OFF on

OSD (On Screen Display) Controls

Information

■HD TYPE modes

These 3 modes are not displayed with correct image signals automatically.

1080B	Standard digital broadcasts
1035I	Japanese “High Vision” signal format
1080A	Special Digital broadcasts (for example: DTC100)

Setting the Input Skip

When this is ON, signals which are not present will be skipped over and only pictures whose signals are being transmitted will be displayed. This setting is valid only for the INPUT SELECT button on the unit.

Example: Set to “OFF”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

1.Use the and buttons to select “SETTING 1”, then press the MENU button. The “SETTING 1” menu appears.

2.Use the and buttons to select “INPUT SKIP”.

3.To set the INPUT SKIP mode to “OFF”...

Use the and buttons to select “OFF”. The mode switches as follows each time the or button is pressed:

OFF ON

SETTING 1

OSD
BNC INPUT	:		COMP
D-SUB TYPE	:		RGB
RGB TYPE	:		AUTO
HD TYPE	:		1080B
INPUT SKIP		:	OFF
FACTORY	:		OFF
NEXT PAGE
SEL.	ADJ.		EXIT EXIT

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

■INPUT SKIP settings

OFF	Regardless of the presence of the signal, scan and
	display all signals.
ON	If no input signal is present, skip that signal.

* “SETTING NOW” will appear during the input search.

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

48