Centralized Telephone Programming Flow Chart–How to Use
To use the Centralized Telephone Programming Flow Chart, follow these instructions first:
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11.
•To Enter Programming Mode:
–Press f00
–Press ssc
–Dial the extension number to be programmed. Buttons on to which lines or pools are assigned light up to show the current Line Ringing setting: remaining buttons can be programmed with Auto Dial number or features
•To Program Another Feature at the Same Extension:
–After you program one feature, continue with the instructions in the box for the next feature
•To Change Setting for Another Extension
–Press c
–Dial the new extension’s number
•To Erase a Feature or Auto Dial Button:
–Press the programmed button
–Press!
•To End Programming Mode:
–Press f00
Icon Description
✔= Factory setting
= Button with lights required
= Button with lights recommended
2.0= PARTNER ACS R. 2.0 or later
3.0= PARTNER ACS R. 3.0 or later
