![](/images/new-backgrounds/1295370/29537045x1.webp)
Quick Reference Guide | 2 Installing Your System | |
|
|
|
|
|
|
CAUTION:
Batteries and battery cover are packaged in a separate box. If you are replacing batteries, the old batteries must be removed with the power on or the system’s memory will be lost.
Follow these steps to insert the batteries:
1Locate the battery compartment at the bottom of the PARTNER ACS processor module, below the extension jacks.
2Push gently on the battery icon (the locking latch) and slide the battery icon up to cover the plus icon; this unlocks the battery assembly.
3Remove the battery assembly by gently pulling the tab at the bottom of the battery compartment cover.
4Insert two new
5With the locking latch in the unlocked position (battery icon and “minus” icon visible), slide the battery assembly into the processor module along the battery guides on the inside of the battery compartment. Push the battery assembly in far enough that the edges of the assembly slip behind the plastic housing of the processor module.
6Pressing lightly on the battery icon on the front of the battery assembly, slide the locking latch downward to secure the assembly in place. The “plus” icon and the battery icon should now be visible on the front of the battery assembly.
Installing the Control Unit 13