Avaya 700217243 manual Installing the Cover, Installing Telephones

Quick Reference Guide 2 Installing Your System

10Gather the line and extension cords hanging below the wire managers of the first two modules, and twist-tie or wire-wrap them. Repeat for the remaining cords. For the 5-slot carrier, place each bundle of wires in the indentations cut out of the bottom edge of the carrier.

Installing the Cover

If you have a 5-slot carrier in a system of Release 3.0 or earlier, it is important to install the cover to keep the modules dust-free and properly seated, and the system working efficiently. Install the cover for the 5-slot carrier by following these steps:

1To cover the modules, grasp the upper edges of the cover and hold it squarely over the control unit.

2Place the cover over the modules and make sure it fits firmly in place.

3Insert the #6 screw into the tab on the lower front of the cover. Tighten the screw.

Installing Telephones

After you have installed the control unit and have connected the line and extension cords, you are ready to install the telephones. Installing the telephones includes assembling, connecting, and testing the telephones. As desired, you also can connect an Intercom Autodialer to system telephones at operator extensions. See the PARTNER Advanced Communications System Installation, Programming, and Use guide and the documentation that comes with the telephone.

Installing the Cover 17