Quick Reference Guide | 4 Programming System Features | |
|
|
|
|
|
|
To restrict an extension from making calls on a specific line:
1Press f00ss#302at extension 10 or 11.
2At the Extension: prompt, enter the extension number to be programmed.
3At the Line: prompt, enter the line number to be restricted at this extension.
The current restriction appears.
4To change the line restriction for this extension, press Duntil the appropriate value appears.
•1 = No Restriction
(calls permitted on that line; this is the factory setting) ✔
•2 = Out Only
(can only make outside calls, not receive them, on that line)
•3 = In Only
(can only receive calls, not make them, on that line)
•4 = No Access (cannot receive or make calls, but can join calls, receive transferred calls, or pick up calls on hold on that line)
5Do one of the following:
•To restrict another line at this extension, press nor puntil the line number shows on the display. Repeat Step 4.
•To restrict another extension, press N+ Pand begin at Step 2.
6Select another procedure, or exit programming mode.
Dialing Restrictions and Permissions 43
