Avaya 700217243 manual Backup Programming-Automatic #123

Quick Reference Guide 6 Maintaining Your System

Backup Programming–Automatic (#123)

Use this feature to set up the automatic backup of all programming (except the system date, day, and time). When Backup Programming–Automatic is set to Active, the information is backed up at 2:00 a.m. on the first day of each month to a Backup/Restore PC Card.

If Backup Programming–Automatic is Active and an automatic backup fails, a Backup-Failure Alarm message appears (instead of the system date and time) on the top line of the telephone display at idle Extensions 10 and 11.

See Chapter 7, “If Something Doesn’t Work’ for an explanation of these messages and suggested corrective actions, and for the procedure for clearing the Backup-Failure Alarm message.

To change the setting for Backup Programming–Automatic:

1Check that only one Backup/Restore PC Card is in the processor module.

2Press f00ss#123at extension 10 or 11.

3To change the setting, press Dor duntil the setting you want appears, or press rto return the setting to the factory setting. The possible settings are:

•1 = Active

•2 = Not Active (the factory setting) ✔

•3 = Backup Alarm Cleared

4Exit programming mode.

For information about using Option 3, Backup Alarm Cleared, see “Clearing a Backup-Failure Alarm” on page 74.

Backup and Restore 55