Avaya 700217243 manual Evaluating the Environment, Installing the Control Unit

2 Installing Your System Quick Reference Guide

Evaluating the Environment

Before you begin the physical installation of the system, you must check that all environmental factors are within the acceptable ranges. See the PARTNER Advanced Communications System Installation, Programming, and Use guide for more details.

Installing the Control Unit

The stand-alone processor module or a carrier and its modules are referred to as the control unit. The control unit must always be wall-mounted.

WARNING:

There are no customer-serviceable components inside the system modules or carrier. There are hazardous voltages within that can cause severe or fatal personal injury. DO NOT OPEN MODULES.

To install the control unit, you must do the following:

•Wall-mount the control unit.

•Label the jacks.

•Ground the system.

•Insert the batteries into the processor module.

•Initialize the system.

•Check the LEDs on the modules.

•Install the cover (5-slot carrier only on a system of Release 3.0 or earlier).

Wall-Mounting a Stand-Alone Processor Module and a 2-Slot Carrier

Install the processor module within 5 feet (1.5 meters) of a properly grounded wall outlet (not controlled by a switch) and the network interface jacks.

8 Evaluating the Environment