Korg D4 Select an effect, Record, Press the GUITAR/MIC key, Edit an effect module, Stop recording

5. Select an effect

Press the [GUITAR/MIC] key

The guitar/mic effects will appear.

Use the [VALUE] dial to select an effect program

Play your guitar to hear the sound.

Edit an effect module

Press the [PAN] knob for one of the effect modules within the selected effect chain, and then turn the [VALUE] dial to select that effect module. You can turn the [PAN] knobs to edit the value of the parame- ters in that module.

Press the [EXIT] key

You will return to Play mode.

6. Record

Adjust the recording level

Use the [TRACK 1] fader to adjust the recording level. While you watch level meter [1], gradually raise the fader as far as possible without allowing the level to reach CLIP. Use the [MASTER] fader and [PHONE] knob to adjust the monitor volume.

Arm the D4 for recording

Press the [REC] key to put the D4 into record-ready mode. The [REC] key will blink.

Record!

When you are ready to perform, press the [PLAY] key. Recording will start, and you may begin playing your instrument. During recording, the [REC] key and [PLAY] key will be lit.

Stop recording

When you’re finished performing, press the [STOP] key. Recording will stop, and the [REC] key and [PLAY] key will go dark.

22