Korg D4 owner manual PAN pan, PAN adjust the pan stereo position, RTM LVL adjust the rhythm level

PAN: pan

You can use the D4’s knobs to adjust the pan and sends, edit the effects, and adjust amp settings as easily as when using an analog mixer or effect processor. The function of the knobs is switched automatically according to the mode you select. Then you can press the [SEL] key and use the knobs for other functions.

When a master type effect is selected

The [SEL] key switches the [PAN] knobs’ function between AMP/FX, PAN, and SEND.

When an effect other than a master type effect is selected

The [SEL] key switches the [PAN] knobs’ function between AMP/FX and PAN.

If you’re not using the master effect (i.e., when the [MAS-

TER] key is unlit), you can’t select SEND.

When you select a mode, the function of the [PAN] knobs will automatically switch to the following functions.

1.Effect mode AMP/FX EDIT

2.PAN

PAN: adjust the pan (stereo position)

This lets you adjust the pan (stereo position) of each track. If you turn a knob while the counter is shown in the dis- play, the parameter and its value will be shown for a cer- tain length of time.

	1. Pan
70	.................................................1a. Pan 1	...[L30	...cnt	R30]
	1b. Pan 2	[L30	cnt	R30]

1c. Pan 3	[L30...	cnt...	R30]
1d. Pan 4	[L30...	cnt...	R30]

RTM LVL: adjust the rhythm level

When the PAN function is selected, the knob located above the master fader will adjust the rhythm level. This is the same setting as the “RhythmLv” parameter of “RHYTHM” mode.

1e. RhythmLv [0...50]

SEND: adjust the send level

Here you can adjust the send level from each track to the master effect. If you turn a knob while the counter is shown in the display, the parameter and its value will be shown for a certain length of time.

This SEND function is only available when a Master type effect is selected.

1. Send
1a. Send 1	[0...	100]
1b. Send 2	[0...	100]
1c. Send 3	[0...	100]
1d. Send 4	[0...	100]

RETURN: adjust the return level

If you’ve selected the SEND function, the knob located above the master fader will adjust the return level from the master effect. This is the same setting as the “FxRetLv” parameter of the master effect.

1e. FxRetLv [0...100]