Korg D4 owner manual Mixer adjustments, Select a mixer parameter, Setting the InTime and OutTime

You can perform steps 2–3 even during playback.

If you want to save the registered locate points as part of the song data, press the [STOP] key to save the song. If you turn off the power without saving the song, the locate points you registered will not be preserved.

Moving to the IN or OUT points you registered

Press the [IN (LOC1)] key or [OUT (LOC2)] key. You will move to that time location.

Setting the InTime and OutTime

To specify the InTime and OutTime locations used for track editing operations, you can simply register the desired time to each key as described in “Registering the IN and OUT locate points.”

If you want to specify InTime and OutTime locations that are independent of the IN and OUT settings, press the lit [IN] or [OUT] key while you’re in the track editing opera- tion; the display will change to the time of that locate point. Then, in the same way as when moving the current time location, use the CURSOR []/[] keys to make the desired counter value blink, and turn the [VALUE] dial to specify the time.

By pressing the [PLAY] key at this time, you can hear approximately two seconds of playback starting at the selected time location.

The modified time you specify here will not be reflected by the locate point.

If you want to change the To Time or End Time for track edit- ing operations, press the [PUNCH] key when setting the parameter.

36

Step 6. Mixer adjustments

By using the mixer to adjust the volume, tone, and pan- ning for input/recording or playback of each track, you can create the most effective overall sound.

1. Select a mixer parameter

Adjusting the level (volume), and pan (stereo position)

Use the [TRACK 1]–[TRACK 4] and [MASTER] faders to adjust the levels. Use the [PAN] knobs to adjust the pan. While the recorder is stopped and the counter is dis- played, moving a knob will cause its value to briefly appear.