Korg D4 Erase Track “ErsTrack” - erasing a track, Operation, 5Set the “In Time” and “Out Time.”

example, select “1.” Then press the CURSOR [] key.

5Set the “In Time” and “Out Time.”

Use the [VALUE] dial to specify each locate point. After you’ve specified the locate points, press the CURSOR [] key. (Refer to “Copying a track”)

You can press the [PLAY] key to hear approximately two sec- onds of playback starting at the selected time location.

6Execute the editing operation.

When the display asks “Ins OK?,” press the CURSOR

[] key to execute the operation. When the blank space has been inserted, the display will indicate “Finish!”

7Press the [PLAY] key to listen to the play back, and verify that the operation occurred as you intended.

You can press the [UNDO] key to return to the state prior to executing this operation. (→p.26)

Erase Track “ErsTrack” — erasing a track

This operation erases any recorded information from the specified region (In–Out) of a recorded track. When you erase the region, the data in that region will change to silence.

In Out DestTrk

DestTrk

Blank

As an example, here’s how to erase the In–Out region of track 1.

1Store the In and Out time locations in the [IN (LOC1)] key and [OUT (LOC2)] key.

2Select “TRK EDIT” mode.

Set the [MODE] knob to “TRK EDIT.”

Operation

3Select the Erase operation.

Use the [VALUE] dial to select “ErsTrack,” and press the CURSOR [] key.

4Select “EraseTo” (track number from which you want to erase data).

Use the [VALUE] dial to select the number of the track from which you want to erase data. For this example, select “1.” Then press the CURSOR [] key.

5Specify the InTime (“In” time location) and OutTime.

Use the [VALUE] dial to make your selections (see “Copy Track”). Then press the CURSOR [] key. To use the time locations you specified in Step 1, select “LOC 1 (IN)” as the “In” time and “LOC 2 (OUT)” as the “Out” time.

You can press the [IN (LOC1)] or [OUT (LOC2)] key at this point to modify the selected time. You can also press the [PLAY] key to audition the playback for approximately two seconds starting at the selected time. Modifying the time here will not affect the time that is registered in the key.

6Execute the operation.

When the display asks “Ers OK?,” press the CURSOR [] key to execute the operation. When the data has been erased, the display will indicate “Finish!”

7Press the [PLAY] key to listen to the play back, and verify that the operation occurred as you intended.

You can press the [UNDO] key to return to the state prior to executing this operation. (→p.26)

47