Korg Messages, Your computer does not recognize the D4, Your computer does not release the D4

USB

Your computer does not recognize the D4

Is the USB cable connected correctly? (→p.53)

→Re-connect the cable.

Is the D4 in USB mode? (→p.53)

Depending on the computer hardware you are using, your computer may be unable to recognize the D4 via a USB con- nection.

Your computer does not release the D4

The procedure will depend on the operating system of your computer. (→p.53)

When you connect the D4, you are requested to install software or a device driver

Does the operating system version of your computer support the D4? (→p.53)

Appendices

Messages

CardLock

While USB-connected, it is forbidden to remove the card from the D4.

→Do not disconnect the USB cable when this message is displayed. Doing so may damage the data in the card. Data can be written from the computer to the card inserted in the D4.

CdFormat

(→p.86: Display indicates “CdFormat”)

CdNotRdy

While USB-connected, no card is inserted into the D4, or the card cannot be accessed.

→Insert a card. If a card is already inserted, turn off the power, re-insert the card, and then turn the power on once again. In this state, it is possible to disconnect the USB connection.

CdRecvry

(→p.86: Display indicates “CdRecvry”)

CrdReady

While USB-connected, the computer is ready to access the card inserted in the D4.

→Data can be written from the computer to the card inserted in the D4. In this state, it is possible to discon- nect the USB connection.

87