Korg D4 owner manual Flanger St Flnge Stereo Flanger, Mod Delay St Moddly Stereo Mod Delay

FLANGER

ST FLNGE (STEREO FLANGER)

These effects give the sound modulation and a sense of pitch movement.

1. TIME	[1...10]: Adjusts the delay time, controlling the
	frequency range at which the effect will
	apply. Adjusting this toward 0 will cause
	the modulation to occur at a higher pitch.

2.FEEDBACK.. [–10...+10]: Adjusts the unique character of sound. Raising this setting appropriately will produce a “jet” effect.

3.	SPEED	[0.1...10Hz]: Adjusts the speed at which the pitch is
		modulated.
4.	DEPTH	[0...10]: Adjusts the depth at which the pitch is
		modulated. When set to 10, the TIME
		parameter has no effect.
5.	MIX	[0...10]: Adjusts the amount of effect mixed into
		the sound.

MOD DELAY

ST MODDLY (STEREO MOD DELAY)

These effects can also modulate the delay time to produce chorus or flanger-like effects.

1. TIME ...............[0...1.75]: Adjusts the delay time.

2. FEEDBACK..... [0...+10]: Adjusts the feedback (repeated “echoes”).

3.	SPEED	[0.1...10Hz]: Adjusts the speed at which the pitch is
		modulated.
4.	DEPTH	[0...10]: Adjusts the depth at which the pitch is
		modulated.
5.	MIX	[0...10]: Adjusts the amount of effect mixed into
		the sound.

TREMOLO

TREM/PAN (TREMOLO/PAN)

These effects simulate the tremolo that is built into some gui- tar amps. TREM/PAN can be selected in CHAIN 1.

	1.	-----(BLANK)	..................
78	2.	SPREAD	[0...10]: Switches between tremolo and pan. *For

		TREM/PAN
	-----(BLANK)	: *For TREMOLO
3.	SPEED .......[1.0...	10Hz]: Adjusts the speed of tremolo.
	.................... [0.1...10Hz]: Adjusts the speed of tremolo.
		*For TREM/PAN
4.	DEPTH	[0...10]: Adjusts the depth of tremolo.
5.	-----(BLANK)	:

PTCH SFT (PITCH SHIFTER)

ST PITCH (STEREO PITCH SHIFTER)

These are pitch shifter effects with a ±2 octave range of adjust- ment.

1.	-----(BLANK)
2.	-----(BLANK)
3.	PITCH	[–24...	+24]: Adjusts the pitch change amount.
4.	FINE	[–50...	+50]: Fine adjustment of pitch change amount.
5.	MIX	[0...	10]: Adjusts the amount of effect mixed into
For stereo			the sound.
1.	L PITCH	[–24...	+24]: Adjusts the L ch pitch change amount.
2.	L FINE	[–50...	+50]: Fine adjustment of the L ch pitch change
			amount.
3.	R PITCH	[–24...	+24]: Adjusts the R ch pitch change amount.
4.	R FINE	[–50...	+50]: Fine adjustment of the R ch pitch change
			amount.
5.	MIX	[0...	10]: Adjusts the amount of effect mixed into
			the sound.

PHASER

ST PHSER (STEREO PHASER)

These modulate the phase to give a “swirling” character to the sound.

1.	MANUAL	.........	[1...10]: Adjusts the frequency at which the effect
			applies.
2.	FEEDBACK		[0...10]: Adjusts the distinctive tonal character.
3.	SPEED	[0.1...	10Hz]: Adjusts the modulation speed.
4.	DEPTH		[0...10]: Adjusts the depth of the effect.
5.	-----(BLANK)