Korg D4 owner manual VALUE dial

bus. During playback, the sound is output from the [MASTER OUT] jacks at the volume specified by this fader. If you’ve selected “BOUNCE,” “MASTERING,” or “MP2” as the “REC MODE,” this fader adjusts the overall recording level of the tracks selected by “REC SELECT.”

15.[VALUE] dial

Use this to select parameters or edit their values. Pressing down on this dial has the same result as pressing the CURSOR [] key.

16.[MODE] knob

Use this knob to select a specific mode. (→p.24)

17.[EXIT] key

This key returns you to a specific page for each mode or page. Press it to cancel the selected operation when editing (i.e., when the “EDIT” indication is lit), or to return from Effect or Tuner mode to the mode selected by the [MODE] knob.

18.[STORE] key

Press this key to register a specific point in the song (time location) to the [IN (LOC1)] or [OUT (LOC2)] (locate point) keys. When renaming a song, press this key to assign the name and store the song. For details on how to register a time location, refer to “3. Using locate points to change the time” in “Step 5. Viewing and changing the time” of the Operation section.

19.[IN (LOC1)], [OUT (LOC2)] (locate point) keys

Pressing these keys moves the song to their stored time location. After pressing the [STORE] key, press one of

10

these keys to store the current time location to that key. In the auto-punch record mode (the [PUNCH] key will be lit), recording will automatically begin and end (punch-in/out) at the times specified by these keys. The times registered to these keys are also used for track editing (“TRK EDIT” mode) and for auto-punch recording (See “Step 3. Re-recording a specified time region of a track: Auto punch-in/out.”) For details on how to register a time location, refer to “3. Using locate points to change the time” in “Step 5. Viewing and changing the time” of the Operation section.

20.[PUNCH] key

This key turns auto-punch recording on/off. On (key lit): Auto-punch recording .

Off (key unlit): Conventional recording.

For details on using auto-punch recording, refer to “Re-recording a specified time region of a track: Auto punch-in/out” in “Step 3. Recording” of the Opera- tion section.

21.CURSOR [], [] keys

Use these keys to move between pages in the display. The key(s) will light to indicate the direction(s) in which it is possible to move.

22.[SEL] key

Use this key to select the function of the [PAN] knobs. The display shows the currently selected function.

23.TRANSPORT keys

Use these keys to operate the recorder (e.g., play, record).

PLAY

This plays the currently selected song.