Korg D4 Quick start, Preparations, Turn the power on, Insert the card, Connect your guitar

Quick start

If you just can’t wait to get started, this section will explain how to connect your guitar, record your playing on one track, and then play it back.

1. Preparations

Insert the card

Insert the card (CompactFlash) into the card slot. (→p.16)

The CompactFlash card that came with your D4 is already formatted and contains the demo songs. How- ever, if you are using a new CompactFlash card, you will need to format it before you begin recording. (→p.55)

If you format the CompactFlash card that was included with the D4, you will lose all the demo data (demo song and effect data) that it contained.

Connect your guitar

Connect a shielded cable (mono phone plug) to your guitar. Connect the other end of the cable to the D4’s [INPUT1] jack.

Set the D4’s [INPUT1] switch to GTR.

20

Connect your headphones

Connect your headphones to the D4’s [PHONE] jack. Set the [PHONE LEVEL] knob to 0.

If you want to connect an amp or audio system, refer to p.15.

2. Turn the power on

Connect the AC adapter

Connect the included AC adapter to the [DC 9V] jack.

Set the [MASTER] fader to “0”

Lower the D4’s [MASTER] fader.

Turn the power on

Turn on the [POWER] switch located on the rear panel of the D4, and the start-up screen will appear in the display.