Vidikron VP-42HD → RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ←, → RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ←, Input Select settings

OSD (On Screen Display) Controls

The mode switches as follows each time the or buttons is pressed:

The available sources depend on the setting of “BNC INPUT”.

RGB: → LAST ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←

→ RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ←

COMP: → LAST↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←

→ RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ←

SETTING 3			3 / 3
PREVIOUS PG.
TIMER
INPUT SELECT	: VIDEO2
CONTROL LOCK :		OFF
IR ENABLE	:	ON
LOOP OUT	:	OFF
ID NUMBER	:	ALL
VIDEO WALL
SEL.	ADJ.	EXIT EXIT

4.Once the setting is completed ...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

Information

■INPUT SELECT settings

LAST	Last mode (the mode that was last selected at
	the time the power was switched off).
VIDEO 1, 2, 3	VIDEO input mode.
RGB 1, 2, 3	RGB input mode.
HD 1, 2	HD/DVD input mode.

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

Enabling/disabling the front panel controls

This function enables/disables the front panel controls. Example: Setting “ON”

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “SETTING 3”, then press the MENU button. The “SETTING 3” screen appears.

2.Use the and buttons to select “CONTROL LOCK”.

64