Vidikron VP-50, VP-60 Press the Exit button to return to the Image Sweep screen, Soften, Speed

Information

■Setting the time

ACTIVE	Set the time duration for “IMAGE SWEEP”.
	When the ACTIVE is set to “ON” the mode will
	stay on.
STANDBY ....	Set the standby time until the “IMAGE SWEEP”
	mode starts.
SPEED	Set the moving speed for the “IMAGE SWEEP”.
	The speed decreases as the number increases.

*The “STANDBY” can not be set when the “ACTIVE” is ON.

*The “ACTIVE” and “STANDBY” can be set for up to 12 hours and 45 minutes in units of 3 minutes.

6.Once the setting is completed...

Press the EXIT button to return to the IMAGE SWEEP screen.

SOFTEN

Reduces edges and softens the image.

Example: Setting “SOFTEN” to “2”

3.Use the and buttons to select “SOFTEN”.

4.Use the and button to select “2”. The mode switches as follows each time the or button is pressed:

1 2 3 4 5

OSD (On Screen Display) Controls

PIXL PROTECT

LUM. SETTING		:	AUTO
ORBITER		:	OFF
INVERSE		:	OFF
IMAGE SWEEP		:	ON
SOFTEN		:	2
SEL.	ADJ.		EXIT EXIT

Information

■SOFTEN settings

OFF ........ Turns the SOFTEN function off.

1,2,3,4 .....Activates the SOFTEN setting. The higher numbers

create a softer image.

“SHARPNESS” can not be adjusted on the “PICTURE ADJUST” menu.

Setting the Sidebar Lev. for the sides of the screen

Use this procedure to set the Sidebar Lev. for the parts on the screen on which nothing is displayed when the screen is set to 4:3 size.

Example: Adjusting the “SIDEBAR LEV.”

Perform the following operations.

1.On the MAIN MENU, select “SETTING 2”, then press the MENU button. The “SETTING 2” menu appears.

57