Vidikron VP-50 Setting the allocation of the audio connectors, To set the Audio INPUT1 to VIDEO2

Note:

If “CAN NOT ADJUST” appears...

Set “AUDIO INPUT” on the AUDIO SETUP menu correctly.

OSD (On Screen Display) Controls

COMP: → VIDEO1↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1 ← → RGB3 ↔ RGB1 ↔ HD/DVD2 ←

AUDIO SETUP

4. Once the adjustment is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once again.

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired input.

BASS

TREBLE

BALANCE

AUDIO INPUT1

AUDIO INPUT2 AUDIO INPUT3

0

0

0

:VIDEO 2

:HD 1

:RGB 1

Example: Setting “AUDIO INPUT1” to “VIDEO 2”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

1.Use the and buttons to select “AUDIO SETUP”, then press the MENU button. The “AUDIO SETUP” screen appears.

2.Use the and buttons to select “AUDIO INPUT1”.

3.To set the AUDIO INPUT1 to “VIDEO2”...

Use the and buttons to select “VIDEO2”.

The mode switches as follows each time the and buttons is pressed:

The available sources depend on the setting of “BNC INPUT”.

RGB: → VIDEO1↔ VIDEO2 ↔ VIDEO3 ↔ HD1 ← → RGB3 ↔ RGB2 ↔ RGB1 ←

SEL. ADJ. EXIT EXIT

4.Once the adjustment is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

■AUDIO INPUT

A single audio input cannot be selected as the audio channel for more than one input terminal.

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that this also restores other settings to the factory defaults.

41