Pride Mobility PMV5001 manual How do I change a battery?, Why do my new batteries seem weak?

I V . B A T T E R I E S A N D C H A R G I N G

How do I change a battery?

WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and gloves when handling batteries and wash hands after handling.

WARNING! Always use two batteries of the exact same type, chemistry, and amp hour (Ah) capacity. Refer to the specifications table in this manual and in the manual supplied with the battery charger for recommended type and capacities.

WARNING! Do not mix old and new batteries. Always replace both batteries at the same time.

WARNING! Contact your Pride Provider if you have any questions regarding the batteries in your PMV.

WARNING! Do not replace the batteries while the PMV is occupied.

WARNING! The batteries on your PMV should only be serviced or replaced by an authorized Pride Provider or a qualified technician.

1.Remove the seat and rear shroud.

2.Disconnect the battery tie-down strap.

3.Disconnect the T-handle battery harness. See figure 17.

4.Disconnect the battery cables from the battery terminals.

5.Remove the old batteries.

6.Place new batteries into the battery wells.

7.Connect the red battery cable to the positive (+) battery terminal.

8.Connect the black battery cable to the negative (-) battery terminal.

9.Reconnect the T-handle battery harness.

10.Reconnect the battery tie-down strap.

11.Reinstall the rear shroud and seat.

Why do my new batteries seem weak?

Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cad- mium batteries (nicads), and other common battery types. Deep-cycle batteries are specifically designed to provide power, drain down their charge, and then accept a relatively quick recharge.

We work closely with our battery manufacturer to provide batteries that best suit your PMV’s specific electrical demands. Fresh batteries arrive daily at Pride and are shipped fully charged to our customers. During shipping, the batteries may encounter temperature extremes that can influence their initial perfor- mance. Heat diminishes the charge on the battery; cold slows the available power and extends the time needed to recharge the battery.

It may take a few days for the temperature of your PMV’s batteries to stabilize and adjust to their new room or ambient temperature. More importantly, it takes a few charging cycles (partial draining followed by full recharging) to establish the critical chemical balance that is essential to a deep-cycle battery’s peak performance and long life.

24 www.pridemobility.com Hurricane