19Hurricane www.pridemobility.com
III. YOUR PMV
REAR SECTION
The batteries (not shown), the main circuit breaker (reset button), the manual freewheel lever, the anti-tip
wheels, and the motor/transaxle assembly (not shown) are located on the rear section of your PMV. See
figure 6.
Tiller Console Fuses
These fuses help protect your PMV’s front lighting,
turn signals, and key switch console systems from
receiving an overload of electrical current. The fuses
used in your PMV are the same type used in automo-
biles. See figure 5A. See IX. “Care and Maintenance”
for fuse replacement.
Figure 5A. Tiller Console Fuses
B+
RIGHT RUNNING LIGHT
LEFT RUNNING LIGHT
RIGHT TURN SIGNAL
LEFT TURN SIGNAL
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your PMV. They are bolted to the frame
at the rear of the PMV.
WARNING! Do not remove the anti-tip wheels or modify your PMV in any way that is not
authorized by Pride.
Batteries (Not Shown)
The batteries store electrical energy that powers your PMV. See IV. “Batteries and Charging ” for infor-
mation on how to charge your PMV batteries.
Figure 6. Rear Section
MAIN CIRCUIT BREAKER (RESET
BUTTON)
ANTI-TIP WHEELS
MANUAL FREEWHEEL LEVER
Status LED
The status LED alerts you to electrical problems that
may occur with the PMV. The LED remains constantly
lit while your PMV is on. If your PMV develops an
electrical problem, the status LED will flash a code.
See VIII. “Basic Troubleshooting” for flash codes.