Disassembly | Pride Mobility PMV5001 instruction

V I I . D I S A S S E M B L Y A N D A S S E M B L Y

DISASSEMBLY

You can disassemble the PMV into seven pieces: the seat, the front section, the rear section, the rear shroud, the basket, and the batteries. See figure 16. No tools are required to disassemble or assemble your PMV. Since the disassembled sections of the PMV take up more floor space than the assembled unit, place the PMV on a level, dry surface with sufficient room to move the parts around. You will need about 5 feet (1.5 meters) in all directions. Keep in mind that you may need assistance to lift some of the PMV components.

SEAT	REAR SECTION

REAR SHROUD

FRONT SECTION

BATTERIES

BASKET

Figure 16. The Hurricane Disassembled

WARNING! Avoid lifting weight beyond your physical capability. Ask for assistance when necessary while disassembling or assembling your PMV.

1.Place the manual freewheel lever in the drive posi- tion.

2.Lift the seat up and off the PMV.

3.Gently pull the shroud up and off of the rear section of the PMV.

4.Disconnect the battery strap.

5.Unplug both T-handle battery harnesses. See figure 17.

6.Remove the batteries.

7.Unplug the front-to-rear harness. See figure 17.

WARNING! Failure to unplug both T- handle battery harnesses and the front- to-rear harness prior to separating the front and rear sections could result in permanent damage to the PMV.

T-HANDLE BATTERY HARNESS

FRONT-TO-REAR HARNESS

T-HANDLE BATTERY HARNESS

Figure 17. Harness Connections

Hurricane

www.pridemobility.com

31

Image 31

Pride Mobility PMV5001 manual I . D I S a S S E M B L Y a N D a S S E M B L Y, Disassembly

Contents

Hurricane F E T Y G U I D E L I N E S N T E N T S Canada N T R O D U C T I O N S a F E T Y Product Safety Symbols S a F E T Y S a F E T Y General Removable Parts PRE-RIDE Safety CheckModifications Incline Information Perform the following inspections prior to using your PMVWeight Limitations Tire Inflation Maximum Recommended Incline Angles Braking Information Cornering Information Correct Curb Approach Outdoor Driving Surfaces Doors Inclement Weather PrecautionsFreewheel Mode Stairs and Escalators Batteries Battery Disposal and RecyclingElevators LIFT/ELEVATION Products Reaching and Bending Motor Vehicle TransportPositioning Belts Getting Onto and OFF of Your PMV ALCOHOL/SMOKING Prescription DRUGS/PHYSICAL LimitationsElectromagnetic and Radio Frequency Interference EMI/RFI Tiller Console I . Y O U R P M To Move Backward use either of the following To Move Forward use either of the following Status LED Motor/Transaxle Assembly Not Shown Charging Your Batteries Reading Your Battery VoltageB a T T E R I E S a N D C H a R G I N G Batteries and Charging How does the charger work? Follow these easy steps to charge your batteries safelyWhat if my PMV’s batteries won’t charge? Can I use a different charger? How can I ensure maximum battery life?How often must I charge the batteries? Why do my new batteries seem weak? How do I change a battery? What about public transportation? Getting Onto Your PMV PRE-RIDE Adjustments and ChecksP E R a T I O N Before Getting on Your PMV Getting OFF of Your PMV Power Down Timer Feature Seatback Adjustment Tiller Angle AdjustmentSeat Rotation Adjustment FRONT-TO-BACK Seat Adjustment Seat Height Adjustment Armrest Angle AdjustmentChanging the seat height System 2 Operation with power seat switch only Power Seat Optional I . D I S a S S E M B L Y a N D a S S E M B L Y Disassembly Toggle Latch Release Frame Sections Assembly Diagnostic Flash Codes I I . B a S I C Troubleshooting What if the main circuit breaker repeatedly trips? C a R E a N D M a I N T E N a N C E Both pneumatic and solid tires Wheel ReplacementIf your PMV is equipped with a solid tire insert Follow these easy steps for a quick and safe repair ABS Plastic Shrouds Wiring HarnessesNylon Lock NUT Replacement Fuse Replacement Storing Your PMV Light Bulb ReplacementDisposal of Your PMV A R R a N T Y Implied Warranties Warranty ExclusionsService Checks and Warranty Service Exclusions also include components with damage caused by P E N D I X I Specification S P E N D I X I Specification S T E S T E S T E S INFMANU2635