JVC RX-6022VSL manual Tuner Operations, Selecting the FM Reception Mode

4 Press MEMORY again while the	MEMORY
selected channel number is flashing
on the display.

The selected channel number stops flashing.

The station is assigned to the selected channel number.

ANALOG	SPK	TUNED STEREO AUTOMUTING
	L C R	VOLUME
	S.WFR LFE

CH-

5Repeat steps 1 to 4 for storing more stations.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

To tune in a preset station

On the front panel:

1 Press FM or AM to select the				FM		AM
band.
The last received station of the
selected band is tuned in.
	ANALOG SPK	TUNED	STEREO AUTOMUTING
	L C R			VOLUME
	S.WFR LFE
2 Press FM/AM PRESET 5/∞					FM/AM PRESET

(up/down) repeatedly until you find the channel you want.

•Pressing FM/AM PRESET 5 (up) increases the channel numbers.

•Pressing FM/AM PRESET ∞ (down) decreases the channel numbers.

From the remote control:

1 Press FM/AM to select the band (FM or FM/AM

AM).

The last received station of the selected band is tuned in and 10 keys now work for tuner operation.

•Each time you press the button, the band alternates between FM and AM.

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.

•You can store the FM reception mode for each preset station (see page 16).

1While listening to an FM station, press

FM MODE.

•Each time you press the button, the FM reception mode alternates between “AUTO” and “MONO.”

FM MODEFM MODE

On the front panel		From the remote control
	ANALOG SPK	TUNED STEREO AUTOMUTING
	L R

ANALOG	SPK	TUNED
	L	R

AUTO : Normally select this.

When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display. (Initial Setting)

MONO : Select this to improve the reception (but stereo effect will be lost).

In this mode, you will hear noise while tuning into the stations. The AUTO MUTING indicator goes off from the display. (The STEREO indicator also goes off.)

Tuner Operations

2Press 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

Note:

TEST		CENTER
1	2	3
EFFECT		REAR L
4	5	6
MENU		REAR R
7/P	8	9
ENTER	SUBWOOFER
10	0	10
RETURN		100

When you use 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD player and others. (See page 28.)

17