MAINTENANCE
1.Unplug the unit and let it cool completely.
2.To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater.
3.DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.
4.DO NOT immerse the heater in water.
5.Wait until the unit is completely dry before use.
STORAGE
Store the heater in a cool, dry location when not in use. If available, use the retail packaging and pack up the heater to prevent dust from collecting on and inside the heater.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair of service:
1.Check if the power cord is plugged into an electrical outlet, if not, plug in.
2.Check if electricity to the main fuse is working.
3.Check if the heater is set to ON by confirming the light on the control panel is lit. If not, turn the POWER SELECT dial to LOW or HIGH to turn on the unit.
4.Check if the heater is on a level surface. If the
5.The room temperature has reached the temperature on the manual thermostat. Increase the temperature on the thermostat so the heater will continue operation or wait for the room temperature to drop below the set temperature on the heater.
9
