Operating Instructions
1)Set the fan on a stable, level surface.
2)Confirm that the Speed Control Knob is set to “O” (off). Plug the cord into a standard outlet.
3)Adjust to the desired speed setting: O: Off
I: Low Speed
II: Medium Speed
III: High Speed
4)The fan can operate in oscillation or stationary mode. Press the Oscillation Knob down to activate the oscillation mode. To stop oscillation, pull control knob up.
5)To adjust the tilt of the fan head, grasp the fan motor housing and gently push forward or backward. The fan head adjusts into three positions.
6)Unplug the fan when not in use.
Maintenance
1)Set the switch to off and unplug the unit.
2)Clean using a damp cloth and a mild detergent, if necessary. Make certain all detergent residue is removed.
3)Never use abrasive cleaning agents or solvents. This may cause damage or deterioration to the surface of the unit.
4)Do not immerse the fan in any form of liquid. Do not allow water to drip on or into the fan motor housing.
Storage
When not in use, store the fan in a cool, dry location. To prevent dust and dirt
Troubleshooting
If the fan will not operate:
1)Confirm that the fan switch is not in the off position.
2)Make sure the electricity to the main fuse is working. For troubleshooting assistance, contact customer service at (888)
6
