OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate the heater when it is in the upright position.
Use the instructions below to operate the heater using the control panel or the included remote control.
1.Open the control panel cover to view the control dials.
2.The control dial on the left (when facing the front of the heater) is the heat setting dial. When the dial is set to “0” the heater is in the off position.
3.To turn the heat on fan mode, turn the heat setting dial to the five bladed fan icon. This will turn on the fan and circulate cool air. When in fan mode, turn the thermostat dial (on the right when facing the front of the heater) to max to circulate air.
4.Turn the heater dial to the “ ~ “ position to heat in low mode. To regulate the room temperature, turn the thermostat dial to the right until the heater turns on. This thermostat setting will be slightly above room temperature. The heater will shut off when the room reaches the set temperature on the thermostat. Once the room temperature drops below the thermostat temperature, the heater will automatically turn itself on. The heater will continue to turn on and off to regulate the room temperature. Increase the thermostat dial until you reach the desired comfort setting.
5.Turn the heater dial to the “ ≈ “ position to heat in high mode. To regulate the room temperature, turn the thermostat dial to the right until the heater turns on. This thermostat setting will be slightly above room temperature. The heater will shut off when the room reaches the set temperature on the thermostat. Once the room temperature drops below the thermostat temperature, the heater will automatically turn itself on. The heater will continue to turn on and off to regulate the room temperature. Increase the thermostat dial until you reach the desired comfort setting.
6.For maximum heating power, turn the heater dial to high mode “ ≈ “ , and turn the thermostat dial to max.
5
