INTRODUCTION
Heater Diagram
1. | Power Switch |
2. | ECO Green Light |
| Indicator |
3. | Temperature Control |
| Knob |
4. | Temperature Control |
| Red Light Indicator |
5. | Power Supply Cord |
6. | Foot with Caster |
7. | Metal Grille |
8. | |
9. | Mounting Hole |
10. | Mounting Support |
11. | Screws |
12. | Mounting Anchor |
| for Wall Mounting |
Remove Packaging
PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER!
1.Remove the heater from the box.
2.Remove the poly foam from both ends and remove the poly bag.
3.Remove the 2 remaining bags from the box.
One bag contains:
2 feet with casters. [Fig 1]
Other bag contains:
1 mounting support, 2 screws and 2 mounting anchors for wall mounting. [Fig 2]
4.Save the packaging for storing the heater while it is not in use or during summer months.
