ASSEMBLY
1.Remove the heater body, two wheelbases, wheels, screws, and washers from the box. Remove the packaging materials and keep for future storage.
2.Attach the wheels to each wheelbase with the supplied wheel screws, small black spring- washers, and small grey washers.
Wheel Screw
Wheel
Wheel Base
Small Black
3.Be certain the heater is unplugged and the controls are set to off. Set the heater on the floor upside down.
4.Attach a wheel base (with wheels attached) to each end of the heater body using the supplied standard screws, large black
Standard Screw
Large Black
Large Grey Washer
Wheel Base
Heater Body
5
