◆Installation
Electric Wiring
Note: Wiring must be done by a certified technician according to the local rules & regulations. The connecting wire should be correctly connected to circuit interface. Otherwise, it can cause a fire, electricity leakage and so on.
The diagram is shown as below:
NOTE:
1.Wiring should be correctly installed.
2.Tighten the nut of terminal board to avoid falling off.
3.Incorrect wiring will cause the unit to malfunction.
4.Units that are not properly grounded are hazardous and may cause the unit to fail.
Wire
Model | Capacitance of air | Grounding min | Power wire | Fuse | Fuse | |
of unit min. | ||||||
switch | section | (Indoor) | (Outdoor) | |||
| section | |||||
|
|
|
|
| ||
30A |
|
| 3.15A | 25A | ||
|
|
|
|
|
|
- 16 -