How do I turn on the air conditioner mode?

To turn on the air conditioner mode, make sure the exhaust hose and window kit are properly installed, plug in the power cord, and press the POWER button on the control panel. Then, press the Mode button until the AIR CONDITIONER light comes on the display, and set the desired temperature and fan speed.

What should I do for efficient cooling during hot days?

For efficient cooling during hot days, set the temperature at the lowest setting, keep the fan speed on high, reduce the length of the exhaust duct, insulate the exhaust hose and window kit, and minimize direct sunlight.

Operating The Unit Using The Control Panel

Q: Is the exhaust hose required for dehumidifier mode?

Yes, when the unit is running on dehumidifier mode, the exhaust hose is required and must be vented outside using the supplied window kit.

OPERATING THE UNIT USING THE CONTROL PANEL

Air Conditioner Mode

1)Install the exhaust hose and window kit properly (see pages 7 & 8 ).

2)Plug the Power Cord into an electrical outlet.

3)Turn on the unit by pressing the POWER button on the control panel.

4)Press the Mode button until the led of AIR CONDITIONER light up on the control panel display.

5)Press the ▲ or ▼ buttons until the desired room temperature appears on the control panel display. The temperature ranges from 61°F - 88 °F (16 °C - 31 °C).

6)Select the desired fan speed by pressing the FAN button.

NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.

NOTE: When the unit is running on cooling mode, the exhaust hose is required and must be vented outside using the supplied window kit.

Dehumidifier Mode

1)Install the exhaust hose and window kit properly (see pages 7 & 8 ).

2)Plug the Power Cord into an electrical outlet.

3)Turn on the unit by pressing the POWER Button on the control panel.

4)Press the MODE button until the led of DEHUMIDIFIER light up on the control panel display.

5)change the direction of the air flow manually adjust the horizontal louvers up or down.

NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly during while dehumidifying. Keep the windows and doors closed to aid the effectiveness of the unit as it removes moisture from the room.

NOTE: When the unit is running on dehumidifier mode, the exhaust hose is required and must be vented outside using the supplied window kit. The unit will not perform in dehumidifier mode when the room tem-

perature is lower than 61°F .

Compressor Indicator

The COMPRESSOR LED will light up on the control panel display when the compressor turns on. The LED of COMPRESSOR will turn off when the compressor shuts off.

Soleus Air PE8-12R-32 manual Operating The Unit Using The Control Panel, Air Conditioner Mode

Models: PE8-12R-32