Soleus Air SG-PAC-08E4 manual Remote Control Operating Instructions, LCD DISPLAY and, Mode Labels

REMOTE CONTROL OPERATING INSTRUCTIONS

		LCD DISPLAY and
NOTE: Heat mode is not available		MODE LABELS
on the SG-PAC-08E4
and KY-80E4
POWER BUTTON		MODE BUTTON
	TEMP SELECT BUTTONS
FAN BUTTON		SWING BUTTON
SLEEP BUTTON		(Not Available on SG-PAC-08E4&KY-80E4)
	TIMER BUTTON

1)Power On and Off - Press the ON/OFF (POWER) button once to manually turn the unit on. Press the Power button once more to turn the unit off. When you manually power the unit on and off by pressing the ON/OFF button, the preset timer will be cancelled.

2)Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Auto, Cool, Dry, and Fan only mode. Once a mode is selected, an arrow will light up on the LCD display next to the selected MODE label on the remote. Auto mode automatically chooses the cool, dry, or fan mode based on the current room temperature.

NOTE: HEAT MODE

NOT AVAILABLE

3)Fan Speed - Press the FAN speed button to cycle through low, medium, and high fan speeds. The small fan icons will light up depending on which speed is selected. The more fan icons light up, the higher the speed. The fan icons are located on the LCD display next to the SPEED label.

4)Temperature Setting - When the unit is in Air Conditioner mode you can select your desired temperature. Press the TEMP SELECT buttons (+ or -) to select your desired temperature setting. The temperature on the LCD display on the remote control will increase or decrease accordingly. Hold the +/- buttons for two seconds to rapidly increase or decrease the temperature.

9