ELECTRICAL REQUIREMENTS

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove the ground prong. Do not use an adapter

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock

Recommended Ground Method

The electrical ratings for your air conditioner are listed on the model and serial number label located on the front left side of the unit (when facing the front).

Specific electrical requirements are listed in the chart below. Follow the requirements below for the type of plug on the power supply cord.

Wiring Requirements

Power Supply Cord

 

 

 

 

115 volt (103.5 min.—126.5 max)

0-12 amps

15-amp time-delay fuse or circuit breaker

Use on single outlet circuit only

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a 3 prong power supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord must be plugged into a 3 prong outlet and grounded in accordance with all local codes and ordinances. If a 3 prong outlet is not available, it is the cus- tomer’s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrician.

It is the customer’s responsibility:

Copies of the standards listed may be obtained from:

• To contact a qualified electrician

National Fire Protection Association

• To assure that the electrical installation is adequate

One Batterymarch Park

Quincy, Massachusetts 02269

and in conformance with the National Electrical Code,

ANSI/NFPA 70 - latest edition, and all local codes and

 

ordinances.

 

 

 

LCDI Power Cord and Plug

 

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord that is required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is damaged and leakage occurs, power will be disconnected from the unit.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test the plug:

1.Plug power cord into a grounded 3 prong outlet

2.Press RESET (on some units a green light will turn on).

3.Press the TEST Button, the circuit should trip and cut all power to the air conditioner (on some units a green light may turn off.

4.Press the RESET button for use. You will hear a click and the A/C is not ready for use.

NOTES:

The RESET button must be engaged for proper use.

The power supply cord must be replaced if it fails to trip when the TEST button is pressed and the unit fails to reset.

Do not use the power supply cord as an ON/OFF switch. The power supply cord is designed as a protection device.

A damaged power supply cord must be replaced with a new power supply cord from Soleus Air Powered by Gree.

The power supply cord contains new user serviceable parts. Opening the tamper-resistant case voids all warranty and per- formance claims.

NOTE: Your units power cord and plug may differ from the one shown.

3

Page 4
Image 4
Soleus Air SG-WAC-08ESE-C, SG-WAC-06ESE-C manual Electrical Requirements, Recommended Ground Method

SG-WAC-06ESE-C, SG-WAC-08ESE-C specifications

Soleus Air has made a significant mark in the HVAC industry, particularly with its line of window air conditioning units designed for efficient cooling solutions. Two notable models from this range are the Soleus Air SG-WAC-08ESE-C and SG-WAC-06ESE-C. Each unit boasts innovative features and technologies aimed at enhancing user comfort and energy efficiency.

The Soleus Air SG-WAC-08ESE-C is a robust 8,000 BTU unit ideal for cooling spaces up to 350 square feet. It incorporates several key features, including a programmable timer that allows users to set the unit to turn on or off at specific times. This feature is particularly beneficial for those who want to return to a cool environment after a long day. The unit also includes a remote control, enabling convenience and ease of use from a distance.

The SG-WAC-08ESE-C utilizes a three-speed fan and multiple cooling settings, allowing users to tailor the airflow to their comfort needs. Energy efficiency is a hallmark of this model, as it comes with an Energy Efficiency Ratio (EER) rating that helps to minimize electricity usage without compromising performance. Additionally, its energy-saving mode adjusts the cooling intensity based on the room temperature, leading to lower energy bills.

On the other hand, the Soleus Air SG-WAC-06ESE-C is designed with 6,000 BTU of cooling power, making it suitable for spaces up to 250 square feet. Much like its counterpart, it also features a programmable timer, remote control, and three-speed fan settings for customizable comfort. The energy-efficient design of the SG-WAC-06ESE-C helps users manage their energy consumption effectively, highlighting Soleus Air's commitment to environmentally friendly technology.

Both models come with a built-in dehumidifier function that efficiently reduces humidity levels, making them perfect for humid climates. They are designed for easy installation, and their sleek appearance complements various room decors. The units are equipped with user-friendly interface controls, ensuring that adjustments can be made effortlessly.

In conclusion, the Soleus Air SG-WAC-08ESE-C and SG-WAC-06ESE-C are excellent choices for individuals seeking reliable and efficient window air conditioning solutions. With their user-centric features, energy-saving technologies, and effective cooling capabilities, these models reflect Soleus Air's dedication to comfort and sustainability.