Soleus Air SG-WAC-12HCE manual Assembly & Installation Cont, Placing the Cabinet Inside the Window

ASSEMBLY & INSTALLATION (CONT.)

Top Angle Rail and Side Bracket Installation

1.Place the air conditioner on a hard flat surface.

2.Locate the foam gasket and top angle rail

3.Attach the foam gasket to the top angle.

4.Install top angle side to cabinet rail using the #10 3/8” Pan Head Phillips screws as shown in FIG 7.

Foam Gasket and Top

FIG. 7

7.Attach foam adhesive seal along the bottom of the cur- tain bottom channel. FIG 9

FIG. 8 FIG. 9

Placing the Cabinet Inside the Window

1.Open the window and place the cabinet in the middle of the window sill.

2.Make sure the bottom rail is seated over the window sill as shown below. Bring the window down temporar- ily behind the top angle rail to hold the cabinet in place.

5. Insert top and then bottom of right-hand curtain into the top and angle rails on the cabinet.

SILL

STOOL

ANGLE

3. Fasten cabinet to window sill (B) using three #10 x 1/2” pan-head Phillips screws (A). Pre-drill holes if needed.

6.Extend right-hand curtain outward to insert the #10 x 1/4” pan-head Phillips screw, screw curtain into middle hole of the cabinet. Repeat for left side. FIG 8

9