Solid State Logic AWS V4 manual Safety Considerations, Power Safety

Safety Considerations

This page contains definitions, warnings, and practical information to ensure a safe working environment.

Please take time to read this section before installing or using this unit. Please do not dispose of these instructions.

General Safety

•Read these instructions.

•Keep these instructions.

•Heed all warnings.

•Follow all instructions.

•Do not use this apparatus near water.

•Do not expose this apparatus to rain or moisture.

•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

•Adjustments or alterations to this apparatus may affect the performance such that safety and/or international compliance standards may no longer be met.

•This apparatus is equipped with a headphone socket – excessive sound pressure from earphones and headphones can cause hearing loss.

Caution

•Hazardous voltages may be present inside this apparatus.

•Do not operate this apparatus with the covers removed.

•To reduce the risk of electric shock, do not perform any servicing other than that contained in these Installation Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel and ensure that all power cords are disconnected when servicing this apparatus.

Power Safety

•Multiple power cords may be supplied with this unit – use only the power cord appropriate to your local power wiring. Alternative power cords may be used if rated 2.5A or above and fitted with a 3-pin IEC320 connector.

•An external over-current protection device is required to protect the wiring to this apparatus. This protection device must be installed according to current wiring regulations. In certain countries this function is supplied by use of a fused plug.

•If an extension power cable or adaptor is used, ensure that the total power rating of the power cable and/or adaptor is not exceeded.

•An external disconnect device is required for this apparatus. The appliance coupler is a suitable disconnect device. The appliance coupler shall remain readily operable.

•The power socket used for this apparatus should be located nearby and be easily accessible.

•Unplug this apparatus during an electrical storm or when unused for long periods of time.

•All power cords must be disconnected to isolate this apparatus completely.

1